Checkers Set - 8 × 8 Board and Pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Checkers board with 20 mm squares (dark ones recessed 0.6 mm) and 12 Ø17 pieces per plate: print it in two colours.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Checkers board with 20 mm squares (dark ones recessed 0.6 mm) and 12 Ø17 pieces per plate: print it in two colours.
Board 168 × 168 × 3 mm
Pieces Ø17 × 5 mm with a grip ring
Stack two to crown
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 43 min, 70 g + 21 min, 10 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Juego de damas: tablero y fichas. Sin soportes: 1 h 43 min, 70 g + 21 min, 10 g.
العربية
لعبة الداما: لوح وقطع.