Handheld Console Stand (Switch, Steam Deck, ROG Ally)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand with a 65° backrest, a 28 mm ledge and a slot for the charging cable. The device rests on both sides.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Stand with a 65° backrest, a 28 mm ledge and a slot for the charging cable. The device rests on both sides.
150 mm wide, 86 mm tall
Ledge 28 mm deep, lip 11 mm
Cable slot through lip and base
How it was checked
Printed upright: the backrest leans back 25° from vertical and the open centre is a 45° pointed arch. Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 38 min, 60 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Soporte para consolas portátiles. Sin soportes: 1 h 38 min, 60 g.
العربية
حامل لأجهزة الألعاب المحمولة.