1 / 4
Magnetic Cable Organizer Base with Cleats and Screws — image 1
1 / 4

Magnetic Cable Organizer Base with Cleats and Screws

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A nice wall mounting cable organizer for multiple cables.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Cleat mounting cable magnetic organizer to hide the 3M attachments.

Cleat tolerances might be tight enough to not require screw securing. If not, I use 3x5mm flush screws.

Printing the cable organizers with a flexible filament would be recommended, but I printed with a rigid filament and pushing the cable into the organizer was fine. Printing part on one side shown in image increases part strength.

Steps to mount:

  1. Fully assemble with cleats and screws is required. Add 3M to cleats and then attach to wall using a level if required.

  2. Unscrew if required and remove base. Allow for adhesive to strengthen for at least an hour.

  3. Add magnets to both base and connectors using CA glue.

  4. Add base back to cleats and screw in if required.

  5. Add connectors to cables that you want to organize.

Recommended Parts:

Tags