Numpad Case and Plate with Underglow
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I set about building a numpad because the files I could find weren't quite fitting. I have printed and tested both the…
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 38
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I set about building a numpad because the files I could find weren't quite fitting. I have printed and tested both the sideways switch and the regular switch models and they fit the PCBs I have, but your mileage may vary depending on your PCB.
Here is one of the PCBs I'm using: https://www.aliexpress.com/item/32916152785.html
There are cutouts depending on whether your USB port is above or below the PCB, as well as a bottom panel that can have a cutout as well.
The feet are designed to use 1cm bumpons, available here: https://www.amazon.com/Clear-Close-Drawer-Cabinet-Bumpers/dp/B06XCGM8JT/ref=sr_1_2
And finally it's all held together with (4) M2x12mm screws, I got mine here: https://www.amazon.com/gp/product/B07W5HBRMP/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I hope you enjoy the numpad, please don't hesitate if you have any questions!
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Filament: Overture PLA Black
Category: Computer