1 / 5
XLPower Stratos 200. Blattgriff-Lager-Werkzeug / Bladegrip-bearings-Tool. — image 1
1 / 5

XLPower Stratos 200. Blattgriff-Lager-Werkzeug / Bladegrip-bearings-Tool.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ein kleines Hilfsmittel um die äußeren Lager zu entfernen. A small tool for removing the outer bearings.

Rating
0 / 5
Likes
2
Downloads
4
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Dies ist ein kleines Hilfsmittel um die äußeren Lager in den Blattgriffen entfernen zu können ohne den Blatthalter zu beschädigen. Dazu einfach aus relativ hartem Filament (PLA reicht) drucken. Anschließend wird der Blattgriff eingesteckt wie auf dem Bild zu sehen und mit einem geeigneten Werkzeug (z.B. ein Splintentreiber) ausgedrückt bzw. raus geschlagen.

This is a small tool designed to help remove the outer bearings from the blade handles without damaging the blade holder. Simply print it using a relatively hard filament (PLA will do). Then insert the blade handle as shown in the picture and press it out or tap it out using a suitable tool (e.g. a split pin driver).

Printinformation:

  • PLA

  • 0,2mm

  • 100% infill

  • no support

Tags