Promethium Line · Burnt-Out Promethium Tanker Truck Wreck · 28–32 mm Grimdark Wargaming Terrain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Burnt-out tanker wreck on a 10″ × 2.5″ base with a torn-open tank and an angled flange that docks to the pipeline.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
### A tanker that never made it out
C-03 is a burnt-out promethium tanker: an armoured long-bonnet tractor pulling a round tank trailer. An explosion tore the tank open at the shoulder: 13 sheet-metal flaps bend outwards, tears run into the shell and the paint has blistered around the rupture. The cab is burnt out and four wheels stand on bare rims. The truck was hooked up when it was hit, so an angled standard flange in the base corner docks to the pipeline's loading branch. Standing alone, the stub shows the torn-off hose.
### Features
- Base 10″ × 2.5″ (254.0 × 63.5 mm) with a 45° chamfer at one rear corner, the base is the terrain area
- Vehicle 213.4 mm long: tank 63 mm high, cab 53 mm, bonnet 37 mm
- Torn-open tank with 13 outward-bent flaps, burnt-out cab, folding walkway railing, rear ladder, hose reel, warning sign and route plate C-03
- 8 wheels: 4 with scorched tyres, 4 on bare rims, each on its own axle pin
- Docking stub with a Ø 44 mm system flange on the 28.0 mm ground axis at 45° to the truck: fits the loading branch H13 of the pipeline
- Checked cover: 7 spots along both long sides where bases duck behind the wreck, plus one 32 mm spot on the base behind the tank
- Rules card pocket under the front base plate
### Game use
Rules for Warhammer 40,000, 11th edition. Unofficial fan-made terrain. Not affiliated with or endorsed by Games Workshop. Warhammer 40,000 is a trademark of Games Workshop Ltd.
- Category: Dense (suggested, agree before the game). The mostly closed tank, 63 mm high, blocks sight above 2″.
- Levels: none. No base stands on the walkway or the round tank without overhang, so there is no Plunging Fire from C.
- Objective piece: no.
- Terrain action: none. Bases behind the wreck are usually not fully visible from the other side and then have the Benefit of Cover. The nozzle flange has no game effect.
- Set-wide frame: each player can start 1 terrain action per battle round, across the modules that have one (A, B, D, E, G).
### Print settings
- PETG, 0.4 mm nozzle, 0.2 mm layers
- 3 perimeters, 4 bottom / 5 top layers, 15 % gyroid, 240 °C nozzle / 80 °C bed (your filament's values take precedence)
- No supports, no brim. Every part fits a 220 × 220 mm bed and is already in print orientation.
- 33 printed parts from 20 STL files on 5 plates (A–E). C has no coupon of its own: to test the flange fit, print the flange coupon of pipe bridge A.
Print time and filament (PrusaSlicer 2.9.6 estimate, heat-up not included):
- A · Sand plates + front card frame: 3 h 44 min · 44 g
- B · Upper tank, railing, ladder, signs: 3 h 58 min · 44 g
- C · Lower tank with running gear + rear card frame: 5 h 38 min · 62 g
- D · Tractor: frame, cab, mudguards, reel, handwheel: 3 h 18 min · 32 g
- E · Loading stub, 8 wheels, 8 axle pins: 3 h 11 min · 30 g
- Total: 19 h 49 min · 212 g
### What else you need
- Glue and paint
- Only to dock to the pipeline: 2 magnets, 5 × 2 mm discs, and one loose system pin 5 × 5 × 9.6 mm (the pipeline's pin kit has spares for A and C)
### Assembly highlights
- Dry-fit everything before gluing and keep glue faces free of paint.
- The two base halves join at dovetails. The card frame halves go underneath and overlap the joint.
- Push one axle pin through each wheel into its socket and turn the flattened contact patch down.
- The cab pushes onto the frame with four pegs, the kingpin drops into the fifth wheel.
- Set the stub flange flush with the chamfer. Magnet polarity, the same on every flange of the set: look at the flange face with the notch at the top. Left magnet north pole out, right magnet south pole out.
- Step-by-step instructions with all parts are in BUILD_GUIDE_C.pdf.
### Works with the rest of the set
Promethium Line is a coherent terrain set in ten modules with one story. The mountain is the promethium source, drill station D taps it, and the pipeline H carries it past pipe bridge A and buffer tank B to the refinery with tower E and the bombed tower turned drill rig F. Loading yard G closes the chain. Craters K, the tanker wreck C and field defences J show the fight for it.
Every pipe flange in the set fits every other flange: Ø 44 mm, a square system pin and two 5 × 2 mm magnets. C sits on the 28.0 mm ground line with the pipeline H and loading yard G, and docks at 45° to the side port of H13. See the Promethium Line collection for all modules.
### Files
- Model files: all single STLs in print orientation, plus one PrusaSlicer 3MF project per print plate, named job_<plate>_….3mf (A, B, C, D, E). There is no G-code. Slice the 3MF projects with your own printer profile.
- Other files:
- rules_card_C.pdf: the module's rules card, 85 × 54 mm, for the card pocket
- TABLE_RULES_card.pdf: one card for the whole table (Core Rules reminder, objectives, terrain actions), two sides
- BUILD_GUIDE_C.pdf: parts list, wheel positions, plates and step-by-step assembly
- RULES.pdf: all set rules in full, with Core Rules references and the balance maths
- source_C.zip: the parametric source code, to change tolerances and rebuild every STL
- Print all cards at 100 % (no page scaling). The Table Rules card has two pages: cut them out and glue them back to back.
### How it was made
Designed with AI assistance as parametric Python CAD code (build123d / manifold3d) and checked by automated tests: watertight meshes, overhangs of at most 45°, bridge lengths, wall thickness, collision checks of the full assembly, a docking check against the pipeline and a PrusaSlicer run for every plate. It has not been test-printed yet. The fits are designed, not proven on a real printer, so print the flange coupon first. Makes and feedback are very welcome.
