Counting matching models…
It's a dead, nondescript mech for terrain purposes. Not scaled to any particular size since mechs can wildly change size depending on the setting. I scaled and printed in in PrusaSlicer for Gaslands, but that's not reflected in the model…
This is a from-scratch rebuild of the RoboForce figure Wrecker. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
Disney character form Wreck-It Ralph stl format for 3d print
I split it in half on Tinkercad, added a rock in the middle. Print with supports and brim.
A battered and timeworn wooden rowboat hull, perfect for bringing coastal, riverbank, or dockside scenes to life. The warped planks, exposed ribs, and worn interior seating evoke years of hard travel across rough waters before finally…
Massive octopus crushing a broken wooden boat, wrapped in dynamic tentacles with rich texture and dramatic composition.
Realistic 3D-printed wrecking ball with chain, designed as a decorative display piece with a strong industrial aesthetic. The bold links and solid sphere give it a rugged look that prints beautifully in matte or metallic filaments. The…
Here's part two for our AotP Animated Wreck Gar addons - this Garbage Truck Back and also twin blades! The sides of this kit rotate to allow them to peg onto Wreck Gar be attaching these twin pegs (on both sides) onto the corresponding…
This is my take on Shipwreck for G.I. Joe. You might need to scale this to your desired size.
Decided to attempt to recreate Matt's Offroad Recovery's "World's Largest Offroad Wrecker" for an SCX24 chassis, and well, this is the result. Should be able to assemble using standard SCX24 screws. Could work on various chassis, but this…
I couldn't find an organizer for The Shipwreck Arcana that also included tile holders for each of the five colors. I decided to make my own from scratch, and it came out too good not to share... Print five (5) Tile Rack Assembly parts in…
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . You will need to download the Lucky 13 armature and skin found here https://www.printables.com/model/148367-lucky-13-printable-jointed-figure Although I…
Zipping in next to join the Iconic Ships series - here's Ultra Magnus' Ship from IDW Wreckers! A blocky looking ship powered by a pair of twin engines, this ship cuts an imposing presence on the Iconic Ships base. Devoid of any external…
Here's a christmas deco version of Wrecking Ball. Printed on mk3s+ It prints just fine with the new Snug Supports - but do be careful when removing the area around the bells in the front. xyz Dimensions: 55mm x 63mm x 50mm
well i have the idea to make a wrecked copy of N&k loading vehicles N&k loading vehicles https://www.thingiverse.com/thing:2713498 Category: 3D Printing
It's a dead, nondescript mech for terrain purposes. Not scaled to any particular size since mechs can wildly change size depending on the setting. I scaled and printed in in PrusaSlicer for Gaslands, but that's not reflected in the model…
This model serves more of a test as the main link to the full Wrecker Armour has several hundred downloads and as I find the time to add more body parts I see only a small amount of uploads, so I'm assuming there are other WEB sites that…
This is Wreckers Back Pack and Chest Completed as of today, The rest of his armor still to follow for which time permitting I hope to have loaded over the next week or two. I'm 6 foot 4 so have designed the size of the armor to…
One of my favorite Characters that due to my personal size would suit me well for the next suit come project. After 5 years of learning to 3d model. I'm happy to show off this latest rendition of my work. I'm still learning each and every…
A few simple models to add to your Lego or other toy crane set. Designed with a 4mm hole for the crane's hook. The I beam prints without support on end, the wrecking ball is best printed with support.
Holder for the mini and midi Hultafors wrecking bars on the ELEMENT SYSTEM wall. Used 2 M3*20 mm screws and my ELEMENT SYSEM nut holder .
To print: make sure you import the model as a 3mf project not STL All print settings should be saved, but double check organic supports are turned on (first layer density 100%, first layer expansion 9mm, threshold 25, and top contact Z is…
Kraken vs. Benchy: 3D Print Model Guide Introduction This 3D model, Kraken vs. Benchy , is a dramatic sculpt featuring the iconic Benchy boat being lifted and ensnared by a massive sea creature’s tentacles. The model sits on an…
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
This benchy has seen better days. It will take about 5-ish hours to print in PLA. the g-code uses tree suports.
This is a from-scratch rebuild of the RoboForce figure Wrecker. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
This is an accessory for The Shipwreck Arcana that you can use to hide tiles as players are guessing. You can store them directly in the box and it has enough room for the game contents + any promo cards. I don't sleeve my cards, so I…
This is a spiritual remix of Fabmaszter's Shipwreck Arcana Organizer . It's made from scratch, but I used his same layout. The tiles for my game must be a hair thicker than his because I needed to make the space for them a little longer.…
Star Wars: The Bad Batch is an American animated television series created by Dave Filoni for the streaming service Disney+ . It is part of the Star Wars franchise and a spin-off from Star Wars: The Clone Wars , continuing from the end of…
Star Wars: The Bad Batch is an American animated television series created by Dave Filoni for the streaming service Disney+ . It is part of the Star Wars franchise and a spin-off from Star Wars: The Clone Wars , continuing from the end of…
Aquarium set Follow my profile for more models ( pirate ship, car wreck, diver, diver in octopus tentacles, submarine). Be patient when removing the supports ! Thank you for downloads, likes... Enjoy !
🏴☠ Battle Shots Fleet – 3D Printable Pirate Drinking Game Ships Bring high-seas mayhem to your next game night with this full set of 3D-printed pirate ship game pieces designed for “Shipwrecked” , a Battleship-inspired drinking game…
Update: The extension motor mount was missing form the original release, it has now been added. Also it looks like there is some variation in MG90 servos. Servos other than the ones listed below from amazon may not fit. I have uploaded a…
A Benchy lost at sea! The crew was rescued thankfully by another Benchy. I'd suggest using blue filament for the sea and then whatever you'd like for the broken hull. I used dark grey. I did not use any supports and infill was 15%. I used…
A Benchy lost at sea! This time we can blame JAWS . Pesky shark! The crew was rescued thankfully by another Benchy. I'd suggest using blue filament for the sea and then whatever you'd like for the broken hull. I used dark grey. I did not…
2 Models Available here (read note below) A Benchy lost at sea! The diver was only gone 10 minutes, what happened? Was it JAWS again? We might never know. It's a very long swim home! I'd suggest using blue filament for the sea and then…
A Benchy lost at sea! This time we can blame the ICEBERGS, first the Titanic, then poor aul Benchy! The crew was rescued thankfully by another Benchy. 2 Models: One model with the “Icebergs Ahead” sign, and the other model without. I'd…
I'd suggest using blue filament for the sea and then whatever you'd like for the broken hull. Want more variants? The non-JAWS Edition: Click here for the regular A Benchy lBenchy Wreck at Sea - JAWS Edition model. The Divers Edition:…
A Benchy lost at sea! This time we can blame JAWS . Pesky shark! The crew was rescued thankfully by another Benchy. Want more variants? The Divers Edition: Click here for the Benchy Wreck at Sea - Diver Edition model. The Iceberg edition:…
SNAP! The Benchy has seen better days, no fixing this one. The driver was only gone for 10 mins, what happened? Supports: I did have to use tiny supports, on the divers chest and back to hold the first lower lines of his helmet. A small…
2 Models: One model with the “Icebergs Ahead” sign, and the other model without. Want more variants? The non-JAWS Edition: Click here for the regular A Benchy lBenchy Wreck at Sea - JAWS Edition model. The Divers Edition: Click here for…
📸 Show it off: Tried your own wild color combo? Post your print in the comments—I’d love to see how your version turned out! 🔒 Personal Use Only This model is free for personal use only and may not be sold, shared, or remixed in any form.…
A token of Hammond (Wrecking Ball) from Overwatch. Great for unsolicited gifts to friends and strangers. Inspired by this model - but not a remix (made from scratch)
A Benchy lost at sea! This time we can blame JAWS . Pesky shark! The original was all one model. Now you can print in whatever colors you want!
Created this for a Halloween costume. This uses common 6mm x 3mm magnets to connect the parts together. The heart is about 5 inches wide. If you scale it down or up the magnets will not fit. I have also attached an already painted model.
Model of the Schooner General Butler, a vessel which sank just off the Burlington breakwater in Lake Champlain on Dec 9th, 1876. The model is roughly 1:100 scale, however the print pictured is closer to 1:223 due to print size…
Ralph the Demolisher figure, 25 cm tall, to be printed in one piece. Printing parameters below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Ralph el Demoledor…
Disney character form Wreck-It Ralph stl format for 3d print
Emperor 's wreck is the most recent, and second largest shipwreck of Isle Royale , and the 10th largest across all of the Great Lakes. The wreck rests in 25 to 175 feet (7.6 to 53.3 m). Her bow lies partially broken up in shallow water,…
How to make: Step 1: Cut the cap off of a 500mL PET bottle. Step 2: Cut the bottle in half. Use picture for reference. Step 3: Put one half into the other. Glue together. (Print 2 holders)
I split it in half on Tinkercad, added a rock in the middle. Print with supports and brim.
Seeing how our latest version of Wreck Gar is more or less a Junkion remold, let's work on something to help me look a little closer to how he did in the Animated series! Here's a pair of double jointed articulated garbage truck arms…
A battered and timeworn wooden rowboat hull, perfect for bringing coastal, riverbank, or dockside scenes to life. The warped planks, exposed ribs, and worn interior seating evoke years of hard travel across rough waters before finally…
Massive octopus crushing a broken wooden boat, wrapped in dynamic tentacles with rich texture and dramatic composition.
Realistic 3D-printed wrecking ball with chain, designed as a decorative display piece with a strong industrial aesthetic. The bold links and solid sphere give it a rugged look that prints beautifully in matte or metallic filaments. The…
Here's part two for our AotP Animated Wreck Gar addons - this Garbage Truck Back and also twin blades! The sides of this kit rotate to allow them to peg onto Wreck Gar be attaching these twin pegs (on both sides) onto the corresponding…
I made this knife inspired by Wrecker from the Bad Batch. All parts of the model can be printed without supports. I printed mine in PLA with a .2mm layer Hight on my CR-10. The model is all separate parts that can be printed individually,…
This 3D model is a post-apocalyptic track accessory designed for a Hot Wheels style racing track. The model represents a rusty cybertrucks.
Wrecking Ball With pivot connectors (from Tinkercad) NOT MY ORIGINAL MAKE!!! Will update with more photos soon
This is my take on Shipwreck for G.I. Joe. You might need to scale this to your desired size.
I sculpted in Nomad sculpt. It is Wrecker’s toy from Bad Batch. This is one of over a 130 sculpts I have completed. You can follow me on instagram @gramofunicorntacos to see more of my work. I also sell some models on Cults3d under the…
This is a work-in-progress effort to create a set of scatter pieces representing a wrecked Thunderbolt. I've scaled up the model to what I think is about the right size for 28mm gaming, but as I don't have an original, I'd be happy to…
More playing with wrecks :). I started with Da5id's excellent Rhino clone and added the hatch from OutOfStep's Ground Plunderer . Then I modeled the interior of the Rhino (OpenSCAD and Inkscape again), removed all the doors, etc. Then I…
Decided to attempt to recreate Matt's Offroad Recovery's "World's Largest Offroad Wrecker" for an SCX24 chassis, and well, this is the result. Should be able to assemble using standard SCX24 screws. Could work on various chassis, but this…
I couldn't find an organizer for The Shipwreck Arcana that also included tile holders for each of the five colors. I decided to make my own from scratch, and it came out too good not to share... Print five (5) Tile Rack Assembly parts in…
I printed this model using a 0.1 instead of 0.2 layer height. Tree supports are best but be careful the masts can break if you just try to snap off the trees. Recommend to make 2 starting support layers for stability during the print or…
Made myself a keychain with Wreckers logo on it, feel free to edit it yourself. I personally printed it with 0.25 nuzzle but 0.4 looked good enough as well. I advise printing it in PETG, survives a bit more :]
Find everything in the series: https://www.thingiverse.com/terrain4print/collections This is the third piece from my Gothic Spaceship series. This time it is the nose of the ship. It is fully compatible with previous parts. You can easily…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
I made a sci-fi-ish looking shape. That is the intact version. The prints shown are at different scale, from 50% to 100%. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a…
A piece of blocking shipwreck terrain. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and…
The TA12 is a light troop carrier. It can move infantry into or out of a battle zone. Here it comes in five versions for you to play with. Four is wrecks and the fifth is intact. The photos are for earlier versions. Check the blue…
Space ship wreckage This was just a quick model I made to test how a space whip wreckage could be used as terrain. Wrecks make great terrain. They can be used for objective markers, scenarios, sources of treasures etc.…
Shipwreck Warden Bust A detailed fantasy bust inspired by ancient shipwrecks, ocean guardians, and lost sea ruins. This model features heavy nautical armor, anchor details, rope wrapping, coral growth, shells, barnacles, and broken ship…
Places Art - The Titanic Wreck - Bow Section 3D printable model.
Places Art - The Titanic Wreck - Stern Section 3D printable model.
This marker is placed onto a wrecked vehicle. There are two variants of the marker in the files - both complete but one is drilled for inserting a magnet. Can be scaled up/down as needed. More of my stuff on my Google collections page -…
![[Iconic Ships Series] Ultra Magnus Ship from Transformers IDW Wreckers](https://media.printables.com/media/prints/1043284/images/7909097_ceb7a3da-e773-48bf-9baf-861ccdb8a1d0_390bbae6-52f4-4ad5-b8f9-182a6d752d32/ultramagnusship_fs.jpg)
![Benchy Wreck at Sea - Diver Edition [2 Models]](https://media.printables.com/media/prints/a3383778-caae-4d8e-81ef-677f34a11130/images/10470757_60dbd8d6-8dc7-4057-b861-aeb865f20b62_f5a3271c-c63a-42ad-8cfe-8bcbdbda3c40/img_9161.jpg)
![Benchy Wreck at Sea - Iceberg Edition [2 Models]](https://media.printables.com/media/prints/932ce9ff-7cdc-46f2-ba75-0e6c118137df/images/10497024_853f83d4-175f-403e-b027-6a5b4b316b05_ec30e906-1824-4586-9da0-2751adbae339/img_9260.jpg)
![Benchy Wreck at Sea - Diver Edition [2 Models] - Reduced by 1/3 of the Material](https://media.printables.com/media/prints/f6390c7c-bfab-4099-89a9-f2008fdada67/images/10539178_a8adc53b-f7c7-4077-b623-04ddcd55e4f1_ec480342-1868-479f-9523-ffae69c477a3/img_9161.png)
![Benchy Wreck at Sea - Iceberg Edition [2 Models] - Reduced by 1/3 of the Material](https://media.printables.com/media/prints/09ee4340-6254-4695-84eb-ffc243f8211a/images/10542704_4b953077-880e-43a8-82d0-79375e3bbd3f_5edf184c-3cd9-425c-9c6a-f46d524f50ae/img_92602.png)
