C30A Piston Rod Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flexible insert to protect your precious titanium rods for storage and transport.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Open Community License v1.1 + GAtt v1 + Micro v1
This insert constrains the piston cap from rotating and swinging the skirt into the side of the rod. Particularly for transport where packing material may shift or shake loose, this piece maintains a firm hold until leverage is applied via the rod.
Insert by wrapping the center around the rod. Squeeze the halves together and press down the four flat sections to seat the ledges beneath the piston cap's internal flanges.
Remove by holding the piston cap in one hand and rotating the rod. Each side should pop right out.
Sized for NSX NA1 C30A 90mm pistons but may be scalable.
Print in 95A or softer TPU. Increase or decrease the number of perimeters to adjust compliance if needed.