Magnetic Y-Axis Mount for BTT ADXL345
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount that can use magnets and/or tape to securely mount the BTT ADXL345 V2.0 to the build plate for resonance testing
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Designed specifically for THIS accelerometer:
https://www.amazon.com/dp/B0CHJQ6CXF
I wanted a magnetic mount that didn't need glue or an extremely tight fit to secure the magnets. And it also needed to fit the magnets that I had on-hand (10x2mm discs), so here we are.
There are three options for magnet diameter: 6mm, 8mm, or 10mm. Print the bottom mount that matches your magnets.
You will need:
-x2 Disc Magnets (6x2mm -OR- 8x2mm -OR- 10x2mm)
-x2 M3x8mm screws
-x2 M3 hex nut (up to 2mm deep)
Assembly:
1. Insert x2 M3 hex nuts into the underside of bottom mount (if they're loose enough to fall out, use a piece of tape to hold them in for now)
2. Drop x2 magnets into the bottom mount's magnet sockets
3. Slide the top mount into the matching groove of the bottom mount
4. Fit the BTT ADXL345 into the top mount
5. Gently add the M3x8mm screws - Do not overtighten
6. Printer goes brrrrrrr