4-inch Coupler for SawStop PCS and Dust Right Quick Connect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 4" adapter to connect the dust port on the SawStop PCS cabinet saw to a Dust Right 4" quick connector from Rockler.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 104
- Makes
- 0
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a coupler for a SawStop Professional (PCS) cabinet saw. It adapts the dust collection outlet on the cabinet to the Rockler Dust Right® 4" Quick Connect since they are not quite the same diameter.
I print this as completely solid with wall perimeters set to 4 in Cura. It has held up just fine for a few months.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 100%
Shells: 4
Material: PLA+ or PETG
Notes:
This prints fastest if you just print it as shells. This should be 4 walls on a .4mm nozzle since this is 3.2mm thick.