Gridfinity 9V Battery Holder - 1 / 2 / 6 blocks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity-compatible holder for 9V (PP3) batteries. Drops into any standard Gridfinity baseplate (42 mm grid, 7 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Gridfinity-compatible holder for 9V (PP3) batteries. Drops into any standard Gridfinity baseplate (42 mm grid, 7 mm height units) and stacks on other bins.
Sizes included:
- 1x1 grid, 4u high - holds 1
- 2x1 grid, 4u high - holds 2
- 2x2 grid, 4u high - holds 6
27.3 x 18.3 mm pockets, 22 mm deep - the terminals stay up, out of contact with each other.
Print: no supports, no brim. Bin feet down, as supplied. 0.2 mm layers, 2-3 walls, 15% infill. PLA or PETG.
Standard Gridfinity feet and stacking lip (with 0.2 mm extra clearance so stacks never jam). Designed in CAD and checked: every file is a single watertight solid, the floor stays at least 1.2 mm thick everywhere.
Part of a Gridfinity series for standard-size items: AA, AAA, 18650, CR2032, 9V, SD/microSD, 1/4" bits, drill bits, hex keys, pens. Need another grid size? Leave a comment.