Bosch Powertube 800 Dockingstation for Ikea Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple to use Dockingstation for your Powertube 800 eBike Battery
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Video
!!! Important Notes !!!
Please read the Assembly Guide provided as PDF File
Do not use without the spacer_lower
Parts
Printed Parts
File | QTY | Comment |
|---|---|---|
Bracket_upper.stl | 1 | check print orientation to prevent hooks from cracking! |
Insert_upper.stl | 1 | |
Bracket_lower.stl | 1 | check print orientation to prevent hooks from cracking! |
Insert_lower.stl | 1 | |
Triangle.stl | 1 | |
Spacer_lower.f3d | 1 | Change the parameter "height" to fit your needs |
Sourced Parts
Part | QTY |
|---|---|
Screw ISO 4762 M3 x 12 | 8 |
Screw ISO 4762 M4 x 12 | 4 |
Threaded Insert M3 x 5.7 | 8 |
Threaded Insert M4 x 8 | 4 |
Cable Tie | 1 |
Print orientation of the brackets
Print the brackets as shown in the pictures to prevent the hooks from cracking.
Bracket Lower | Bracket Upper |
|---|---|
![]() | ![]() |
Calculate height for Spacer_lower
The height of the lower spacer needs to be calculated to fit your needs.
Measure the distance from the lower edge of your Skadis Board to the supporting surface. In my case it is 106 mm.

The height of the Spacer_lower calculates as:
height_of_spacer_lower = measured_height - 49.5 mmOpen Spacer_lower_adjustable.f3d in Autodesk Fusion and change the parameter "Height" to the value you calculated.
Recommended addon
In the pictures you see brackets for the Power Supplies BPC3200 and BPC3400. You can download them here:

