1 / 3
Bosch Powertube 800 Dockingstation for Ikea Skadis — zdjęcie 1
1 / 3

Bosch Powertube 800 Dockingstation for Ikea Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple to use Dockingstation for your Powertube 800 eBike Battery

Ocena
0 / 5
Polubienia
5
Pobrania
29
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Video

!!! Important Notes !!!

  • Please read the Assembly Guide provided as PDF File

  • Do not use without the spacer_lower

Parts

Printed Parts

File

QTY

Comment

Bracket_upper.stl

1

check print orientation to prevent hooks from cracking!

Insert_upper.stl

1

Bracket_lower.stl

1

check print orientation to prevent hooks from cracking!

Insert_lower.stl

1

Triangle.stl

1

Spacer_lower.f3d

1

Change the parameter "height" to fit your needs

Sourced Parts

Part

QTY

Screw ISO 4762 M3 x 12

8

Screw ISO 4762 M4 x 12

4

Threaded Insert M3 x 5.7

8

Threaded Insert M4 x 8

4

Cable Tie

1

Print orientation of the brackets

Print the brackets as shown in the pictures to prevent the hooks from cracking.

Bracket Lower

Bracket Upper

Calculate height for Spacer_lower

The height of the lower spacer needs to be calculated to fit your needs. 

Measure the distance from the lower edge of your Skadis Board to the supporting surface. In my case it is 106 mm.

The height of the Spacer_lower calculates as: 

height_of_spacer_lower = measured_height - 49.5 mm

Open Spacer_lower_adjustable.f3d in Autodesk Fusion and change the parameter "Height" to the value you calculated. 

Recommended addon

In the pictures you see brackets for the Power Supplies BPC3200 and BPC3400.  You can download them here: 

Tagi