1 / 2
SKÅDIS pocket for Samsung SmartThings Hub v3 — image 1
1 / 2

SKÅDIS pocket for Samsung SmartThings Hub v3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Calipered pocket that holds a Samsung SmartThings Hub v3 on IKEA SKÅDIS, port edge down, no rattle.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A pocket for the Samsung SmartThings Hub v3, calipered at 127.1 x 126.6 x 29.5 mm (the datasheet says 31). The hub sits base to the board with the port edge (DC, reset, USB, Ethernet) DOWN through an open floor, so the leads drop straight out. Front lips grip the edge of its gently domed top, and a sprung bump in the back plate stops rattles.

Hangs on 2 hook bars (included). Print upside down (open top on the bed), no supports. In hub_pockets.scad set part = "smartthings_print" to export it, or add your own hub to the table at the top.

Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.

Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts

Other parts in my SKÅDIS network rack:

Tags