SKÅDIS pocket for Samsung SmartThings Hub v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calipered pocket that holds a Samsung SmartThings Hub v3 on IKEA SKÅDIS, port edge down, no rattle.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pocket for the Samsung SmartThings Hub v3, calipered at 127.1 x 126.6 x 29.5 mm (the datasheet says 31). The hub sits base to the board with the port edge (DC, reset, USB, Ethernet) DOWN through an open floor, so the leads drop straight out. Front lips grip the edge of its gently domed top, and a sprung bump in the back plate stops rattles.
Hangs on 2 hook bars (included). Print upside down (open top on the bed), no supports. In hub_pockets.scad set part = "smartthings_print" to export it, or add your own hub to the table at the top.
Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.
Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts
Other parts in my SKÅDIS network rack:
Hook bars (start here): https://www.printables.com/model/1866142
TP-Link Omada POE380S injector: https://www.printables.com/model/1866145
TP-Link TL-SG1024D 24-port switch: https://www.printables.com/model/1866147
Heatmiser neoHub v2: https://www.printables.com/model/1866148
Lightwave Link Plus L2: https://www.printables.com/model/1866155
TRIGKEY G4 mini PC: https://www.printables.com/model/1866149
2 x UGREEN 2.5" SSD enclosures: https://www.printables.com/model/1866157
Sonoff ZBDongle-E Zigbee dongle: https://www.printables.com/model/1866160
Wall spacers and caps: https://www.printables.com/model/1866187