P
Printables
SmartThings button Elko holder
Elko plate holder for SmatThings. The button still works when it is in place
Wyniki wyszukiwania: smartthings
Liczymy pasujące modele…
P
Printables
SmartThings button Elko holder
Elko plate holder for SmatThings. The button still works when it is in place
P
Printables
Smartthings button wall mount (prodtruding)
This is a modified version of https://www.printables.com/model/120878-smartthings-button-wall-mount I wanted the button to protrude so I can easily remove the button and change the battery There's a hole for a 2.5mm x 12mm magnet in the…
P
Printables
SmartThings Button Wall Mount
A wall mountable plate designed to hold a SmartThings button. Remixed from: https://www.thingiverse.com/thing:3827965 and https://www.thingiverse.com/thing:5128845 Print with the show face on the bed, supports are not required if you have…
P
Printables
ESRack - Samsung SmartThings Hub
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
P
Printables
Gridfinity SmartThings Multipurpose Sensor
1x2 Gridfinity bin for the SmartThings Multipurpose Sensor Gen 2. It holds two sensors and five CR2450 batteries, which are the kind used by the sensor.
P
Printables
Magnetic Mount for SmartThings Button (Dual Screw)
This is just a remix of kyouteki's Magnetic Mount for SmartThings button. I wanted to be able to use a #8 wood screw and 2 8mmx2mm neodymium magnets. This let me place the holder in locations without a switch plate. Print instructions…
P
Printables
Samsung SmartThings Multipurpose Sensor spacer
I've been frustrated several times mounting a Samsung SmartThings Multipurpose Sensor as a door open/close indicator because some doors have a large offset between the door and the door frame. You can mount your Multipurpose Sensor…
P
Printables
Samsung SmartThings Button Cover
I love my smart home setup, but having to tell my Google assistant to turn on or off the lights at 3 am is a little annoying. So I got some of the Samsung SmartThings buttons. They are exactly that, smart buttons to control your smart…
P
Printables
SmartThings Button Holder for 3 buttons
This is a remix of https://www.thingiverse.com/thing:3284772 for those who'd like the 3-button option. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Hatchbox PLA Red…
P
Printables
SmartThings Button Holder for 3 buttons
This is a remix of https://www.thingiverse.com/thing:3284772 for those who'd like the 3-button option. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Hatchbox PLA Red…
P
Printables
openGrid Multiconnect Samsung SmartThings Hub Gen 3 Mount
A Samsung SmartThings Hub Gen 3 mount for openGrid Multiconnect
P
Printables
LANDSCAPE SMARTTHINGS STATION PHONE HOLDER
PRINTED IN PETG @ .28 20% INFILL ON ANYCUBIC KOBRA S1 THATS OVERDUE FOR A NOZZLE CHANGE AND FILAMENT DRYING, THERE IS A LITTLE WARPING PRESENT IN MY PRINT BUT THE MODEL IS FINE. WOULD PROBABLY RECOMMEND A MATTE PLS. LOST THE FILE WITHOUT…
P
Printables
smartthings station wall mount
wall mount for samsung smartthings station(EP-P9500). only tested with EP-TA800 PD Adapter If you test other power adapters, please leave a comment, and I’ll update this post accordingly.
P
Printables
Samsung SmartThings Multipurpose Sensor 2nd-Gen Spacer
This is a simple spacer for the Samsung SmartThings Multipurpose sensor (2nd-gen). As I started peppering these around the house I noticed that I needed at least three different spacer sizes. First I started with a rectangle, but that…
P
Printables
SmartThings/Aeotec Multipurpose Sensor Magnet Spacer
This is a spacer for the SmartThings/Aeotec Multipurpose Sensor magnet. I made it for the model that I own which is: IM6001-MPP01 Printed in PLA at 10% infill.
P
Printables
SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris
A remix of the SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris. When I sliced the model in S3D it was two objects and the print would have been very weak structurally. I repaired the model so it is only one piece now.…
P
Printables
Samsung SmartThings SmartTag Wall Mount
This holder is designed for Samsung SmartThings SmartTag. It is printed in 2 parts to allow easy removal of SmartTag when needing to change battery or take on the go. Supports will be needed for the center portion of the holder. Be sure…
P
Printables
Samsung/Aeotec SmartThings Door/Window Multipurpose Sensor Cover
The sensor only comes in off-white and is really ugly on dark colored doors. This cover can be used to match the color of the frame without having to paint it. Print in TPU (95) and it will fit snuggly. The model is not precise enough to…
P
Printables
SmartThings/Aeotec Motion sensor screw wall mount
My double sided tape failed as I had it mounted above an entry door, this cures the problem of vibration. Fits a Smartthings motion sensor and I assume Aeotec of the same kind as they look like the exact same product.
P
Printables
Philips Hue, Lutron Casetta, Smartthings 3 - Hubs Vertical Stand
This is a vertical stand I made to consolidate my Philips Hue Hub, Lutron Casetta Hub, and my Smartthings v3 hub.
P
Printables
Samsung Galaxy S23 Ultra Dock with SmartThings Station Holder
I wanted an upright stand that held the SmartThings wireless charging station that came with my S23 Ultra. It's rough around the edges, and I'm certainly not an experienced 3D modeler, but this will charge even with the SView case on the…
P
Printables
SmartThings Motion Sensor (rev 2.0) case for AAA batteries
Remix of "SmartThings Motion Sensor (2015) case with AAA batteries by oscahie" but the original design didn't fit the internals of my sensor which was a green PCB marked with "Rev 2.0", so I remixed this with a few changes to fit better.…
P
Printables
Switch Covers for SmartThings Buttons
Upon setting my house up with Philips Hue smart bulbs I wanted to retain the existing way to turn the bulbs on/off. I didn't want to buy the Philips Hue buttons due to it's lack of automations outside of the Philips Hue eco-system, so I…
P
Printables
SmartThings Water Sensor PVC Mount
SmartThings Water Sensor PVC Mount, designed for 2-inch PVC. I use this to mount a water sensor directly above my sump pump (for earlier notification of issues). Fasten with zip ties. No supports needed.
P
Printables
SmartThings Button Gridfinity
The SmartThings button JUST fits into a 1x1 for Gridfinity. I added a space for an extra battery on the bottom since these buttons go through them so fast. Printed with lightening infill and 2 top and bottom layers. Magnetic holes were…
P
Printables
Samsung SmartThings GPS Tracker Dog Collar Mount
A keychain mount for the Samsung Smartthings Tracker, I use it on my dog's collar. It is pretty much the cheapest real time GPS out there for your pet. Best with 0.4mm nozzle. There is a small lip close to the top to keep the tracker from…
P
Printables
Samsung SmartThings GPS Tracker Dog Collar Keychain Mount
A keychain mount for the Samsung Smartthings Tracker, I use it on my dog's collar. It is pretty much the cheapest real time GPS out there for your pet. Best with 0.4mm nozzle. There is a small lip close to the top to keep the tracker from…
P
Printables
Smartthings Button (2018) Light Switch Plate Mount, Magnetic
I use the Smartthings buttons essentially as locally available control for lights should the internet connection between Alexa and the Smartthings hub be offline. Also makes it easier on guests to control the lights. In order to keep the…
P
Printables
SmartThings multi-sensor 2nd gen
So I couldn't find the part of the SmartThings sensor that triggers the open close switch. Part is not 100% identical to original but from a distance no one will notice :-) Note when printing the model, printer needs to pause so you can…
P
Printables
SmartThings Hub (gen2) Minimalist Wall Mount
Minimalist wall mount for the Smartthings V2 hub. Printed in white, it's almost imperceptible. You will need to print with supports, for the prongs that snap over the top. The hub is a weird asymmetric rectangular shape, where one end is…