Turnable Staple / Quarter-Turn Fastener for Tarps and Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable turnable staple inspired by the plastic fasteners used on tarpaulins, canvas covers, and curtains. Includes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A printable turnable staple inspired by the plastic fasteners used on tarpaulins, canvas covers, and curtains. Includes separate base and rotating head parts.
Mount the base with two screws, place a compatible oval eyelet over the head, and turn the head counterclockwise across the eyelet to retain the cover.
The head connects to the base using a printed quarter-turn mechanism, so no metal pivot screw is needed. It can be removed in the unlocked position.
Dimensions
Base: 70 × 34 mm
Overall assembled height: 40 mm
Mounting hole spacing: 55 mm, center to center
Mounting holes: Ø5 mm
Head opening: 20 × 11 mm
Check your cover’s eyelet dimensions before printing.
Printing and Assembly
Print one base and one head. PETG is suggested..
Starting settings:
0.12–0.20 mm layer height, 15% infill
4 perimeters
Supports where needed around the head opening and quarter-turn features
Remove supports carefully and clean the mating surfaces. Insert the head into the base and turn approximately a quarter turn until it reaches the stop.