Turnable Staple / Quarter-Turn Fastener for Tarps and Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable turnable staple inspired by the plastic fasteners used on tarpaulins, canvas covers, and curtains. Includes
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A printable turnable staple inspired by the plastic fasteners used on tarpaulins, canvas covers, and curtains. Includes separate base and rotating head parts.
Mount the base with two screws, place a compatible oval eyelet over the head, and turn the head counterclockwise across the eyelet to retain the cover.
The head connects to the base using a printed quarter-turn mechanism, so no metal pivot screw is needed. It can be removed in the unlocked position.
Dimensions
Base: 70 × 34 mm
Overall assembled height: 40 mm
Mounting hole spacing: 55 mm, center to center
Mounting holes: Ø5 mm
Head opening: 20 × 11 mm
Check your cover’s eyelet dimensions before printing.
Printing and Assembly
Print one base and one head. PETG is suggested..
Starting settings:
0.12–0.20 mm layer height, 15% infill
4 perimeters
Supports where needed around the head opening and quarter-turn features
Remove supports carefully and clean the mating surfaces. Insert the head into the base and turn approximately a quarter turn until it reaches the stop.