Refill tool for refillable Aldi Expressi compatible coffee pods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hand tool to make the process of refilling coffee pods a bit less fiddly.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Designed to be printed on resin printers, direct on the print bed. Each part is oriented in the model files in their print orientation. Other orientations are not recommended on resin printers as pressure-relief holes are built into the design. Supports shouldn't be necessary, but may not be a bad idea for extra support for the long handle.
Build
The parts of the tamper are designed to be glued together. Super glue works well.
Do not glue the holder parts together - the pod sits between them in use.
After assembly, the tamper and funnel must be coated. 3D prints are not food safe and resin prints potentially less so. I have used a coat of plastic spray primer followed by a coat of food-safe lacquer.
Usage
Place the base on a stable surface
Place the empty refillable pod into the base
Place the funnel on top of the base
Fill the pod with the desired amount of coffee
Apply pressure with the tamper