1 / 6
Fruit Fly Trap Lid for TO82 Jars – 19 Funnels, No Supports — image 1
1 / 6

Fruit Fly Trap Lid for TO82 Jars – 19 Funnels, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric 19-funnel lid for TO82 twist-off jars. Prints without supports. Caught 33 fruit flies in the first night.

Rating
0 / 5
Likes
7
Downloads
30
Makes
0
Views
106
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

# Fruit Fly Trap Lid for TO82 Jars

A fruit fly trap lid with 19 small funnels in a honeycomb pattern. It fits a TO82 twist-off jar, snaps onto the thread lugs, and needs no supports.

## Result

- First hour: 6 fruit flies caught.

- First night: 33 fruit flies caught (22 in one trap, 11 in the other).

I printed three lids and ran two of them side by side. The numbers come from my kitchen and are not a lab test.

## How it works

Fruit flies fly in through the funnel mouths on top (11 mm diameter) and cannot find their way out through the 3 mm exit hole. Each funnel is 20 mm deep and reaches about 18 mm into the jar.

**Bait:** apple cider vinegar with a drop of dish soap and some water. The soap breaks the surface tension so the flies sink. Overripe fruit works too.

## Print settings (what I used)

- Material: HIPS (yellow). ABS should work with the same temperatures. PLA and PETG are untested.

- Nozzle: 0.6 mm, extrusion width 0.82 mm

- Layer height: 0.32 mm (first layer 0.2 mm)

- Perimeters: 10, no infill needed (the part is all walls)

- Supports: none

- Fan: off for HIPS/ABS

- Temperatures: 242/246 °C nozzle, 110 °C bed

- Print time: about 1.5 h, about 22 g

- Orientation: the STL is already flipped, so the plate faces down. Just load it and slice.

## Fit

The lid is tuned to my jar:

- glass neck 77.3 mm

- 80.3 mm over the thread lugs

- 6 thread starts

- 70 mm inside opening, 60 mm inside height

Jars from other brands can differ by a few tenths of a millimetre. Print the **fit test lid** first. It is the same lid without funnels, so it prints fast and uses little filament. If it is too loose or too tight, change D_THREAD, CLEAR or LUG_Z in the generator and run it again.

## Files

- fruit_fly_trap_lid_TO82.stl – the finished trap lid (19 funnels)

- fit_test_lid_TO82_no_funnels.stl – fit test lid, same rim and lugs

- fruit_fly_trap_lid_TO82_generator.py – Python script that generates both STLs

## Customise it yourself

You need Python 3 and three packages: numpy, scipy and scikit-image (install them once with pip):

pip install numpy scipy scikit-image

Then run the script:

python fruit_fly_trap_lid_TO82_generator.py

All dimensions are at the top of the script (jar diameter, lug size, funnel size and depth, wall thickness, bevels). It runs in a few seconds and writes both STL files into the current folder. No CAD software is needed.

Tags