1 / 7
Undead Print in Place Zombie Figure with Brain — image 1
1 / 7

Undead Print in Place Zombie Figure with Brain

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in place zombie figure hugging a brain, no supports needed, with AMS and single colour profiles included.

Rating
0 / 5
Likes
5
Downloads
2
Makes
0
Views
19
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

This print in place zombie is a big headed little undead chap who comes off the bed fully assembled, clutching his favourite snack. He has a gappy grin, bits of brain peeking through his head, and a jointed body so you can tilt his head and give him some attitude. He makes a great Halloween decoration, a daft desk buddy, or a gift for the horror fan in your life.

There are two print profiles to pick from, an AMS multicolour version and a single colour version, so you can print him whatever your setup. No supports and no assembly, which makes him a friendly one for beginners. Once he is off the plate, gently wiggle the joints to free them up. Try glow in the dark or a classic zombie green for a different look.

Filament Colour & Material

PLA is ideal. For the AMS profile, teal with a pink brain and white eyes and teeth (as pictured) looks great, or go classic with zombie green. The single colour version suits silk or glow in the dark PLA.

Print Settings

  • Print in place, no assembly

  • Supports: No

  • Layer height: 0.16mm

  • Infill: 15%

  • Wall line count: 2 or more

  • Line width: 0.6mm for default, initial layer and outer walls (already set in the profiles)

  • Profiles: AMS multicolour and single colour

Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon:

https://www.patreon.com/c/FolkandForge

Tags