1 / 7
Undead Print in Place Zombie Figure with Brain — zdjęcie 1
1 / 7

Undead Print in Place Zombie Figure with Brain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in place zombie figure hugging a brain, no supports needed, with AMS and single colour profiles included.

Ocena
0 / 5
Polubienia
5
Pobrania
2
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

This print in place zombie is a big headed little undead chap who comes off the bed fully assembled, clutching his favourite snack. He has a gappy grin, bits of brain peeking through his head, and a jointed body so you can tilt his head and give him some attitude. He makes a great Halloween decoration, a daft desk buddy, or a gift for the horror fan in your life.

There are two print profiles to pick from, an AMS multicolour version and a single colour version, so you can print him whatever your setup. No supports and no assembly, which makes him a friendly one for beginners. Once he is off the plate, gently wiggle the joints to free them up. Try glow in the dark or a classic zombie green for a different look.

Filament Colour & Material

PLA is ideal. For the AMS profile, teal with a pink brain and white eyes and teeth (as pictured) looks great, or go classic with zombie green. The single colour version suits silk or glow in the dark PLA.

Print Settings

  • Print in place, no assembly

  • Supports: No

  • Layer height: 0.16mm

  • Infill: 15%

  • Wall line count: 2 or more

  • Line width: 0.6mm for default, initial layer and outer walls (already set in the profiles)

  • Profiles: AMS multicolour and single colour

Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon:

https://www.patreon.com/c/FolkandForge

Tagi