HEL E4A m16a1 Silencer Airsoft prop Vietnam war
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:1 Replica of Vietnam era silencer for m16a1. Should fit on avery airsoft m16a1 currently on the market.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replica of Hel e4a made by Human Engineering Laboratory during the Vietnam war:
This is a two part design and the main tube can be printed without supports.
First install the silencer base on the gun and than screw down the maint tube, after that you can tighten the three screws on the side.
Silencer has M14x1 L thread. Also you are gonna need 3x M4x6mm screw and 3x washer. Also for realism I recommend to cut a groove in to the screw head.
Its important to print correct variant to your m16 manufacturer ! For example JG has shorter barrel.
Screws holes are now fixed to cerrect 60 degrees angle !!!