1 / 1
NA Miata Dip Stick Handle REV2 [UPDATED]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need a dipstick handle replacement for an NA Miata?
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Replacement handle for NA Miata Dip Stick REV2. The original one broke off and was missing. This one replaces it.
Updated Version of my original Design:
Filament:
For Best results: ASA
Alternative: PETG
Supports:
Yes (As Applicable)
Infill:
Minimum 30%
Brim:
Yes (As Applicable)
Print Orientation:
Print laying down on flat side with hole on bed.
Assembly Instructions:
Option 1: Epoxy handle onto dipstick
Option 2: There is a hole for an M2 screw. I used a M2x4mm and drilled into the dipstick plastic. If you use a shorter screw (2mm) it could work as a grub screw.