1 / 7
One-Handed Tear Paper Towel Holder – Universal & Adjustable — image 1
1 / 7

One-Handed Tear Paper Towel Holder – Universal & Adjustable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fully adjustable universal paper towel holder designed for smooth unwinding and easy one-handed tearing.

Rating
0 / 5
Likes
15
Downloads
24
Makes
0
Views
218
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

A universal, fully adjustable paper towel holder engineered for convenience and stability.

Thanks to the fine-tuning mechanism, you can adjust the tension perfectly so that the roll spins smoothly when pulling, yet provides enough friction to allow easy one-handed tearing without unraveling the whole roll.

Key Features & Compatibility

  • One-Handed Operation: Perfect tension adjustment allows you to tear off a sheet with just one hand.

  • Universal Fit:

    • Inner Core Diameter: 31 mm – 60 mm

    • Roll Length / Height: 190 mm – 320 mm

    • Outer Diameter: Unlimited!

  • Easy Adjustment: Quick and precise clamping mechanism to fit various towel brands and sizes.

Recommended Print Settings

  • Material: PETG or PLA (PETG recommended)

  • Layer Height: 0.2 mm

  • Infill: 15–25% (Gyroid or Cubic)

  • Perimeters/Walls: 4-6 (for solid threads and structural stiffness)

  • Supports: Only on part - 02_sleeve and 05-shaft

Additional hardware

  • 2x 8x24 pin (might be printed out)

Assembly Instructions

  1. Base & Shaft: Glue 05_shaft into 01_base (the orientation is determined by the cutout).

  2. Pins: Press the pins into 05_shaft so that they protrude from only one side (the other side should sit flush with 05_shaft).

  3. Nut & Support: Place 06_support_plate onto 03_nut.

  4. Slip Ring: Apply a small amount of grease inside 04_slip_ring and press it on. (Tip: Pressing down against a flat table with 04_slip_ring facing downwards is the easiest way).

  5. Check: Verify that 06_support_plate and 04_slip_ring rotate freely.

06_support_plate is there to prevent the paper towel roll from unraveling itself

How to Use

  1. Mounting: Attach the assembled base and shaft to the underside of your cabinet, shelf, or drawer (transparent double-sided nano tape works great).

  2. Loading Towels: Insert the paper towel roll from below. Slide 02_sleeve over the shaft, aligning the pins with the notch, and twist it clockwise until the pins lock into place. A few threads should remain visible below the roll.

  3. Tension Adjustment: Screw on the nut assembly and fine-tune the tension: it should be tight enough to let you tear off a sheet easily, yet loose enough to unroll smoothly with one hand.

Note: If your paper towel roll has an outer diameter larger than 150 mm, simply replace 06_support_plate with a custom-sized one. Keep the inner diameter at 40.2 mm and the thickness/height at 4 mm, while expanding the outer diameter to fit your roll.

Tags