ColorMix Spinning Tops: Teach About Color Mixing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nine spinning tops that teach ColorMix: the face is a pie chart of the recipe, the rim is the printed mix. No supports.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 11
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Spin-and-Mix Tops are nine small spinning tops that show how ColorMix works. The flat face of each top is a pie chart of pure filaments in the recipe's ratio. The rim, cone and stem are printed in the matching mixed colour. Spin the top and the pie blurs into a single colour you can compare with the rim.
THE NINE RECIPES
1. Green: Cyan + Yellow 1:1
2. Orange: Magenta + Yellow 1:1
3. Blue: Cyan + Magenta 1:1
4. Coral: Magenta + Yellow 3:1
5. Amber: Magenta + Yellow 1:3
6. Lime: Cyan + Yellow 1:3
7. Pink: Magenta + White 1:3
8. Deep teal: Cyan + Black 1:1
9. Olive grey: Cyan + Magenta + Yellow 1:1:1
WHY IT SUITS COLORMIX
- Spinning mixes colour over time and the printer mixes it over layers. Putting the two side by side shows how close they get.
- The face is flat, where layer mixing does not work, so it uses pure filaments only. The mixed colour is kept to the rim, cone and stem.
- Top 9 mixes Cyan, Magenta and Yellow into an olive grey, which shows why the set includes Black.
PRINTING AND ASSEMBLY
- Bodies print face down, so each pie chart is a clean first layer. Stems print standing up. No supports.
- Each top is a separate object, so you can print one or all nine. The full plate is 136 x 169 mm.
- Push the stem's pin into the hole in the face until the collar seats. The hole is 5.2 mm and the pin tapers from 5.15 to 4.9 mm. Add a drop of glue if it is loose.
- Body: 40 mm diameter, 14.4 mm tall. Stem: 22.6 mm long.
THE FILE
- PrusaSlicer 2.9.6 project for the Original Prusa XL 5T (Input Shaper, 0.4 mm nozzle), 0.15mm SPEED profile
- Nine objects, every body already assigned to its extruder
- 9 virtual extruders with 2-, 3- and 4-layer cycles
- Slots: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black. All five are used.
- 0.15 mm layers, 10% gyroid infill.
STATUS
Not test-printed yet, and the stem fit is untested. The images are renders. Colours are the ones PrusaSlicer's mixing model predicts for the ColorMix filaments.
