Hole-Fit Templates for WinWing / WinCTRL MCDU-32 and FCU (M4/M5 test holes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat 2 mm templates for checking the MCDU-32 and FCU hole patterns before you print a stand.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Flat 2 mm templates for checking the mounting holes on a WinWing MCDU-32 or FCU before you print a stand or drill a panel.
MCDU: two templates, one for the 136 x 95 mm hole pair (A/B and B rows) and one for 136 x 105 mm (A and A/B rows). The holes are 4.5 mm, for the M4 screws WinWing uses.
FCU: one template that covers six of the eight M5 holes underneath (53 / 114 mm columns, 69 mm rows). Check one end, flip it, check the other. It is 179 mm long, so it fits a 220 mm bed.
Each template has three test holes in the middle. One dot is loose, two dots is the size the templates use, three dots is tight. There is also a small strip with the M4 and M5 test holes on their own. If the two-dot hole is tight on your printer, change the hole size in the .scad.
The hole positions come from the installation drawings in WinWing's own manuals (MCDU-32 manual V1.0, FCU manual V1.1). The OpenSCAD file is included if you want different hole sizes or thickness.
Print settings:
Flat as exported, no supports
0.2 mm layers, 3 walls, PLA is fine
About 20-25 g for each large template
I designed this in OpenSCAD with AI help and haven't test-printed it yet, so print the test strip first and check the template against your panel before you rely on it.
If you want a stand to go with it, I have a paid desk stand kit for the MCDU and FCU on Cults: https://cults3d.com/en/3d-model/gadget/desk-stand-kit-for-winwing-winctrl-mcdu-32-and-fcu-tilt-stand-fcu-feet-des
This is an unofficial design and isn't affiliated with or endorsed by WinWing.
If you print one, I'd love to see it. Post a make with a photo, good or bad, and it helps me improve the next version.