P
Printablesechoromeo
P320 FCU (airsoft)
100% Accurate Frame Model (for airsoft)
- Downloads
- 2,279
- Likes
- 82
- Rating
- 0
Search results: fcu
Counting matching models…
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Panel
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
- Downloads
- 980
- Likes
- 47
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Heading Knob
Dimensionally accurate design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it feels…
- Downloads
- 883
- Likes
- 56
- Rating
- 5
P
PrintablesKitcut
AceXR VR - FCU and Handset inspired by Glock 17 Gen 5
Elevate your AceXR experience with this professionally engineered Glock 17 Generation 5 shell, featuring a fully overhauled and stress-tested Fire Control Unit (FCU). While the original concept was a great starting point, this version has…
- Downloads
- 805
- Likes
- 62
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Speed Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 794
- Likes
- 44
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU ALT Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 745
- Likes
- 41
- Rating
- 5
P
PrintablesWOWA IIID
MK4 Z-Cover halfcut - protect the Z-Axis/Screw/Motor
A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…
- Downloads
- 716
- Likes
- 135
- Rating
- 5
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Vertical Speed Knob
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
- Downloads
- 662
- Likes
- 36
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Push Pull mechanism
Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…
- Downloads
- 648
- Likes
- 68
- Rating
- 5
P
PrintablesMark.coppola
P320 FCU Bending Kit (WORK IN PROGRESS)
P320 FCU Bending Kit (Work in progress) Machine: Klutch 3-1 Manual Brake Press This project is under construction and as I keep tweaking and testing, this will be my landing zone for uploading files and keeping the most current, tried and…
- Downloads
- 488
- Likes
- 30
- Rating
- 0
P
PrintablesMark Ayton [MANTOGA]
Airbus A320 FCU Korry style Switch
Korry style switch for the Autopilot and Auto Throttle buttons on A320 FCU panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. An alternative Housing design in two…
- Downloads
- 444
- Likes
- 21
- Rating
- 0
P
PrintablesLimpidCoder
![Airbus A320 FCU Panel [Multi-Colored Version]](https://media.printables.com/media/prints/593f00c0-3341-493d-8912-13753b25a9c7/images/10386328_3156a600-e933-49bc-86ba-a0dd67c6a0ba_1f09afc6-4763-4888-8223-adef2815539a/pxl_20250716_122757329.jpg)
Airbus A320 FCU Panel [Multi-Colored Version]
Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it + some pictures. Note : I have included the f3d file I used to add the text but since it got corrupted at the end and I had to recover an older version…
- Downloads
- 343
- Likes
- 40
- Rating
- 0
P
PrintablesProject Open Throttle
Winwing FCU to Honeycomb Bravo mounting brackets
I created this model to mount my Winwing FCU to my Honeycomb Bravo throttle. It keeps the FCU rigid and has a 15 degree upward tilt to make it easier to view. Print settings: 0.2mm Layer Height 20% infill 3 walls Print mount on its side,…
- Downloads
- 254
- Likes
- 18
- Rating
- 0
P
PrintablesBill Catherall
Mason Bee & Leafcutter Bee Blocks
These mason bee and leafcutter bee houses need paper inserts to allow for harvesting, cleaning, and storing the cocoons. I recommend using baking parchment paper as it will withstand the elements, won't cause rot or mold, and doesn't have…
- Downloads
- 206
- Likes
- 56
- Rating
- 4.33
P
PrintablesLimpidCoder
Airbus A320 FCU & EFIS Container Box
Update 27/10-25 - Added version 2 back panels for EFIS with bigger cable holes and holes for heat insert. also added bracket to hold everything together. Note: This is a work in progress, some things will change! So far I have not printed…
- Downloads
- 158
- Likes
- 17
- Rating
- 0
P
Printablessgy
Winwing A320 FCU Bracket
This is two brackets to attach the Winwing A320 FCU unit to an Honeycomb Alpha or Bravo. It also can be placed partially under a monitor stand to hold the unit in place. Let the user push and pull buttons without any problems. It also…
- Downloads
- 156
- Likes
- 19
- Rating
- 0
P
PrintablesLimpidCoder
A320 EFIS & FCU Korry Button Lens
A modified version of Mark Aytons A320 Korry Buttons with text, designed to be printed with a multicolor setup and .2mm nozzle. Printed with 0.2mm nozzle, 0.1mm layer height. When importing the object in Orcaslicer/BambuLab do not scale…
- Downloads
- 152
- Likes
- 12
- Rating
- 0
P
PrintablesHenryhbk
WinWing FCU +/- EFIS Desk Mount Stand
If you own the WinWing FCU (with or without the EFIS panels on the side) you know that the WinWing stands that come with it are hardly stable for desk use (fine for mounting on a sim-pit rail). So I made stands that bolt on the same place…
- Downloads
- 136
- Likes
- 10
- Rating
- 0
P
PrintablesNiklas
Wingwing A320 FCU brackets
New version: https://makerworld.com/en/models/674959#profileId-603008 Replacement brackets for the Winwing A320 FCU that can be mounted in the middle, not outside like the original ones. The supplied M5*22 screws with washers are required…
- Downloads
- 135
- Likes
- 15
- Rating
- 4
P
Printablesmm0070
Winwing FCU better desk stand
The included desk stands aren't very good. The unit is extremely wobbly when attached to the back, and it doesn't look good when attached to the sides, so I made this. It covers the EFIS unit port. Use the shortest included screws and…
- Downloads
- 107
- Likes
- 12
- Rating
- 0
P
PrintablesLimpidCoder
Airbus A320 FCU 100-1000 Push Pull mechanism
Note: I recommend refering to this remix for the full switch angle: https://www.printables.com/model/1444964-airbus-a320-fcu-push-pull-altitude-100-1000-mechan Note: The actual position of the marked white line is not true to my other…
- Downloads
- 87
- Likes
- 11
- Rating
- 0
P
PrintablesDakota Cope
WinWing FCU Monitor Arm Mounts Vesa 75x75
Made these to mount the FCU to a monitor arm for more options to mount. Works great and is made to fit Vesa 75x75 holes. Has wiggle room for printers and for easy adjustment to help it fit. Works with the 22mm screws that come with the…
- Downloads
- 72
- Likes
- 11
- Rating
- 0
P
Printablespaddybuss
Winwing / WINCTRL Mounting Bracket Stand for PAP3, FCU / Tab A9+ or other 11″ models
Winwing / WINCTRL Mounting Bracket Stand for PAP3, FCU / Tab A9+ or other 11″ Tablets – 3D Printable Model This 3D-printed mounting bracket is designed to hold two 11″ tablets - such as the Samsung Galaxy Tab A9+ shown in the images -…
- Downloads
- 67
- Likes
- 7
- Rating
- 0
P
PrintablesV-Design
Mini FCU tilt mount
made a tilt mount for the mini cockpit FCU that adds a bit of angle this one uses the suction cub holes to mount in and then use two braces to lock them in place for a stable fit without any screws parts side 1. side 2. front brace.…
- Downloads
- 65
- Likes
- 7
- Rating
- 5
P
Printablesbobstay
Gridfinity holders for Wire Offcuts
Storage for wire offcuts, for people who like to reuse things and can't bring themselves to throw short bits of wire away. Get rid of the box of wire spaghetti and find the perfect reused bit of wire quickly when you need it. Most are 4u…
- Downloads
- 63
- Likes
- 19
- Rating
- 5
P
PrintablesTony Seulanto
Winwing Airbus FCU Mount / Fanatec CSL DD Side Mount
FCU came and fits right in as first picture shows. ——————————————————— I did pre-order the upcoming Winwing Airbus FCU and then started to wonder how to attach it to my rig. Best place would be under monitor on the right side and thought…
- Downloads
- 63
- Likes
- 5
- Rating
- 0
P
Printablespaddybuss
Winwing / WINCTRL Mounting Bracket-Extension for PAP3, FCU, EFIS, PDC / Add-On
I bought the PDC panel for my Boeing PAP3, and while mounting it, I noticed that the entire panel tips forward after installation. To fix this, I designed these small extensions for the original Winwing feet. The panels simply clip onto…
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
Printablesoohsam
Anthead Leafcutter Beefy Spring
Uses an extruder spring, i didnt have any filametrix springs and i haad heaps of these, so i modified the files to adopt.
- Downloads
- 39
- Likes
- 8
- Rating
- 0
P
PrintablesGianni LECLERCQ
Airbus A320 FCU Push Pull Altitude 100-1000 Mechanism
– Required external components to buy – https://www.printables.com/model/1299873-airbus-a320-fcu-100-1000-push-pull-mechanismhttps://www.printables.com/model/1299873-airbus-a320-fcu-100-1000-push-pull-mechanism
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
PrintablesGareth8118
Tilted stand for MiniCockpits MiniFCU simulation flight controller
I use this stand for my MiniCockpits MiniFCU to secure it with Velcro to an IKEA Elloven monitor stand. I've infilled the inlaid lettering with some white UV resin to finish it, but this is obviously not necessary for a functional stand.
- Downloads
- 32
- Likes
- 8
- Rating
- 0
P
Printablescfresh
Winwing Winctrl Airbus FCU tall stand
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesGuillermo Gallardo Selma
Stand MiniFCU
Stand creado para el MiniFCU de https://www.minicockpit.com/ Como comentan en su web se pueden atornilla con tornillos de M4 x 8mm Basado en el soporte VESA
- Downloads
- 31
- Likes
- 0
- Rating
- 0
P
PrintablesTrevor S
WinWing FCU Top Mount on v1 Combat Panel/Takeoff Panel
This will require using larger length bolts to accomodate the extra thickness of these mounts. I used the brackets to mount my FCU on top (using some brackets also included, but from: https://www.thingiverse.com/thing:6616069), note,…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
Printablescfresh
Winwing Airbus FCU adjustable mounts
Adjustable tilting mounts for winwing FCU. Mirror in your slicer for opposite side.
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesLimpidCoder
Airbus A320 FCU Encoder Bracket
A small encoder bracket and feet to hold the encoders stable in Mark Aytons FCU panel. The short bracket is meant for mounting two encoders and one foot. The large is meant for mounting together all encoders and three feet, but since I…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesCamille COSSA
G17 gen 5 ace xr fcu compatible
Handset inspired by Glock 17 Gen 5
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesHeng
Andruckvorrichtung für Hammer B3 Winner - Offcut Thickness guage
Andruckvorrichtung für Hammer B3 Winner Ich habe es jedoch an eine B3 Winner Formatkreissäge von Hammer angepasst. Mit diesem Werkzeug können Sie einen Anschlag festlegen, der auf das Sägeblatt der Kreissäge ausgerichtet ist, so dass Sie…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
Printableskoubis
Hanging Wolfcub - Laser cut
This is a cool happy wolf cub, hanging on a string (or a necklace if you make it small enough) ; you can use any material to cut it (i did mine using 3mm MDF). I was inspired by Physics_Dude:…
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
Printablesaplayz
WinWing Airbus FCU/EFIS Mount for Ikea Skadis
WinWing Airbus FCU Mount for the Ikea Skadis System → Mount your WinWing FCU and/or EFIS on a Ikea Skadis Wall for easy, clean Storage → Has a tight fit when mountig to the panel
- Downloads
- 21
- Likes
- 8
- Rating
- 0
P
PrintablesMartin JM
Airbus A320 FCU ALT Knob adapted for Santi Luib III Mark 2
Altitude Select Knob for push pull encoder and 100/1000 select on A320 FCU adapted for Santi Luib III Mark 2
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
Printablesonagravitashunt
WINWING FCU + EFIS Cable bracket
I wasn't happy with the way the SATA cable on my WINWING FCU+EFIS (pilot side) modules protruded, so I made this bracket to support the connector at the FCU side and also keep the cable itself in the channel. The EFIS side is shorter and…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesF. S.
Polarstar FCU Cover
Polarstar FCU Cover to prevent the button from being pressed accidentally
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesCodusSupremus
P365 FCU Filler
FCU filler to keep grip module and slide together.
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablesoohsam
Anthead Leafcutter Thicker Belt Retainer
Thicker belts (steel reinforced)Dont work with the original leafcutter. This fixes that fo ryou. Enjoy.
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
Printablesfeuerrot
offcube
This is a “calibration” cube, which is slightly offset from 20mm by +/-0.5mm on the X/Y-axis and includes a tapered section from 19.5mm to 20.5mm in Z-direction on the top. (It actually prints smoother if you rotate it by 90°)…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesSteveJB_73
Fanatec DD+ Winctrl FCU mount
Rudimentary, no frills bracket to go on the back of a WinCtrl FCU to mount to a Fanatec DD. Handy if you're trying to combine racing and flying on one sim rig. Has cutouts for USB connection but needs to be a straight connector and not…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesArthurDeusExMachina
Hole-Fit Templates for WinWing / WinCTRL MCDU-32 and FCU (M4/M5 test holes)
Flat 2 mm templates for checking the mounting holes on a WinWing MCDU-32 or FCU before you print a stand or drill a panel. MCDU: two templates, one for the 136 x 95 mm hole pair (A/B and B rows) and one for 136 x 105 mm (A and A/B rows).…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesJL
FCU panel letadla A320 pro Microsoft Flight Simulator 2020
Model panelu FCU letadla Airbus A320 použitelný pro Microsoft Flight Simulator 2020
- Downloads
- 2
- Likes
- 5
- Rating
- 0
P
PrintablesAUT Kenny
Improved Korry Labels for FCU
Those Labels are union grouped in Tinkercad Import them into your Slicer software and paint the Text inside of your Slicer Software paint them like: Glow-In-The-Dark, Clear or the required colour Have fun building!
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
Printables
Airbus A320 FCU ALT Knob adapted for Santi Luib III Mark 2
Altitude Select Knob for push pull encoder and 100/1000 select on A320 FCU adapted for Santi Luib III Mark 2
P
Printables
Airbus A320 FCU Panel [Multi-Colored Version]
Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it + some pictures. Note : I have included the f3d file I used to add the text but since it got corrupted at the end and I had to recover an older version…
P
Printables
Airbus A320 FCU & EFIS Container Box
Update 27/10-25 - Added version 2 back panels for EFIS with bigger cable holes and holes for heat insert. also added bracket to hold everything together. Note: This is a work in progress, some things will change! So far I have not printed…
P
Printables
Winwing Winctrl Airbus FCU tall stand
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
P
Printables
MiniFCU Stand
Minimal stand for MiniFCU. Print on side with open side facing up, printed with minimal supports.
P
Printables
Ring Halfcut Design 3D
This STL model of a ring offers a detailed and customizable design, ideal for 3D printing enthusiasts and jewelry makers. With intricate patterns and smooth curves, it can be scaled and personalized to fit various preferences. Just as the…
P
Printables
MiniFCU Stand
Here is my desktop staand for the miniCockpit MiniFCU. Apparently the real aircraft FCU angle is 17 degrees. As it happens mine is 17.103 degress. Close enough! I used a mini+ with 15% infil with Prusament Galaxy Black PLA. It needs…
P
Printables
Desktop stand for MiniFCU (MiniCockpit)
This is a simple mount for the miniFCU that raises it up off the desk and at a slight angle for ease of use (for those of us without full fledged sim cockpits). The unit mounts to the top using the standard VESA mount and the suction cups…