DRO mount Sino SDS2-3VA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DRO mount for a Sino SDS2-3VA
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I made this mount to use on my mill and lathe. it's not the most sophisticated solution but works well enough so far.
Instuctions:
attach the rectangular plate to the DRO. the holes are 4mm in diameter and arranged in a 36x60mm rectangle, which I measured off the particular DRO I'm using.
attach the round part to your machine. there's 2 versions, one with a single 6mm hole and one with four 6mm holes in a 37mm square arrangement.
use an M8 bold that's at least 45mm long and a nut to attach the parts together and fixate the angle of the device by clamping tightly. maybe don't clamp it too tight unless your're 3d printing steel or similar strength materials.