Nuwave Bravo Pro Toaster Oven Ventilation Port Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Nuwave Bravo Pro is an excellent low-cost drier for FDM filament, reusable desiccant, and other misc. purposes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The Nuwave Bravo Pro is an excellent low-temperature drier for filament, reusable desiccant, and other misc. purposes, but it lacks low-cost ventilation options given the extreme temperature reached by the oven enclosure.
This model is an adapter for the built-in vent port on the oven's backplane for a 3-inch aluminized ventilation hose which can be attached to the back of it using the two existing screw points documented in the photos.
In order for this part to be effective, you must print it out of PA12-CF15 or a similar high-temperature engineering filament, where the finished part must be able to withstand sustained temperatures of at least 350°C. It's also necessary to use a metallized or aluminized duct with this attachment, otherwise the radiating heat can damage it.
Print using supports on the bottom layers. However, you do not need to use supports for the loft of / the actual vent port.