1 / 1
Mooer GWF4 HSW Mount — image 1

Mooer GWF4 HSW Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple vertical holder for the Mooer GWF4 wireless footswitch (Prime P2 / GTRS). The footswitch drops into a cup stand

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Share Alike

# Mooer GWF4 Footswitch Holder for HSW (Honeycomb Storage Wall)

A simple vertical holder for the Mooer GWF4 wireless footswitch (Prime P2 / GTRS). The footswitch drops into a cup standing on its short end, switches facing out, so it's off the floor and ready to grab.

Features

- Mounts with 2 direct hex pegs in one column of an HSW panel (no inserts needed)

- U-slot in the front wall clears the lowest footswitch (Ø18 + 0.5 mm gap), so it never gets pressed

- 0.4 mm fit gap per side: snug, no rattle

- Rounded window in the floor for the USB-C cable and to push the pedal out

- 1 mm chamfers on all outer edges

Printing

- Prints as is, standing upright, no supports

- Bottom peg lies on the bed; the top peg has a 45° ramp underneath

- PETG or PLA, 0.2 mm layers, 3–4 perimeters, 20% infill

- About 32 g of filament

Size: 45.8 × 41.3 × 48 mm (incl. pegs)

Fits a footswitch of 40 × 26 mm cross-section. The FreeCAD build script is parametric, so you can change the device size, fit gap or slot.

Designed for the original HSW panel by RostaP. Not test-printed yet. Feedback welcome!

Tags