1 / 2
Plant Aeration Stick / Pflanzen-Belüftungsstab (250 mm) — image 1
1 / 2

Plant Aeration Stick / Pflanzen-Belüftungsstab (250 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hollow, slotted aeration stick for potted plants – brings air to the roots, helps against waterlogging. No supports.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
36
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

EN

A simple aeration stick for potted plants. Push it into the soil next to the plant – the hollow body with its rows of slots lets air reach the root zone and gives excess water a way to escape. Handy for compacted soil and plants that tend to stay wet for too long.

  • Length: 250 mm, diameter: 15 mm

  • Hollow body with ventilation slots, pointed tip for easy insertion

  • Prints standing upright, no supports needed (brim recommended)

  • Designed in Fusion 360

Tip: For long-term use in damp soil, PETG or ASA is more durable than PLA. Pre-poke a hole in very firm soil so the stick doesn't break.

DE

Einfacher Belüftungsstab für Topfpflanzen. Neben der Pflanze in die Erde stecken – der hohle Körper mit den Schlitzreihen lässt Luft an den Wurzelbereich und gibt überschüssigem Wasser einen Weg. Praktisch bei verdichteter Erde und Pflanzen, die gern zu lange nass stehen.

  • Länge 250 mm, Durchmesser 15 mm

  • Hohlkörper mit Lüftungsschlitzen, Spitze zum leichten Einstechen

  • Stehend druckbar, keine Stützen nötig (Brim empfohlen)

  • Konstruiert in Fusion 360

Tipp: Für den Dauereinsatz in feuchter Erde hält PETG oder ASA länger als PLA. Bei sehr fester Erde vorstechen, damit der Stab nicht bricht.

Print settings

  • Printer: FLSun T1 Pro, 0.4 mm nozzle

  • Layer height: 0.2 mm, 2 walls, 15 % infill (crosshatch)

  • Supports: none – Brim: outer, recommended (250 mm tall on a 15 mm footprint)

  • Material: PLA+ (printed with Sunlu PLA+ 2.0); PETG recommended for permanent use

Note: The second image is an AI-generated illustration, not a photo of a print.

Tags