1 / 5
Screw & bearingless adjustable spoolholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found a lot of spool holders but for the specific design I was looking for they all required real bearings. Since I…
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 1
- Views
- 221
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I found a lot of spool holders but for the specific design I was looking for they all required real bearings.
Since I had some teflon tube lying around, I designed a wheel that has a teflon tube bearing.
I provided screwholes in the base to fix it if you want it to be fixed.
The 2 color base on the picture is due to the fact that I used some left over filaments fused together.
Assembly:
- Put in the slider in the base
- Assemble the wheels
- Cut 2 teflon tubes of 97mm.
- With the slider on the same side as the base wheels, assemble the teflon tube and bend-squeeze it into the other side so you have a teflon "rod". Adjust the slider to the required size and start printing :-).
Category: 3D Printer Accessories