1 / 2
CA glue caddy for Starbond bottles — image 1
1 / 2

CA glue caddy for Starbond bottles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Carry caddy for a full CA glue kit: 4 Starbond bottles, debonder, primer and 3 accessory tubes, with a screw-on handle.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

My Starbond bottles kept tipping over on the bench and the accessories ended up all over the place, so I made a caddy that holds the whole CA kit and carries it to wherever I'm gluing.

What fits

  • back row: 4 slots for the 2 oz Starbond bottles (35.5 mm), so thin, medium, thick and the accelerator spray
  • front row: 3 slots for 30 mm tubes (I keep micro brushes and spare tips in them), one 31 mm slot for debonder and one 26 mm slot for primer

Each slot has 0.6 mm of clearance and three small vertical ribs, so bottles sit snug without wobbling. The top of every slot is chamfered, so they drop in easily, and there are small nubs on the floor, so the bottle doesn't sit flat on the bottom.

Dimensions

  • block: 178 x 83 x 33 mm, slots 30 mm deep
  • handle: 188 x 160 x 10 mm
  • top of the handle sits 160 mm above the bottom of the block

Printing

Printed in PETG on an X1C, 0.4 nozzle, 0.2 mm layers, 2 walls, 15% infill, no supports. The handle prints flat. Both parts fit on one 256 x 256 plate (188 x 249 mm together), about 4 h and 136 g.

Assembly

The handle legs go on the short ends of the block, 2 screws per side. The holes are 2.5 mm, through the 5 mm leg and 9 mm into the block, so short self-tapping screws around 3 x 12 mm work.

Tags