1 / 5
Nightingale 1.0 Optics Plates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nightingale 1.0 Optics Plates for RMR and RMSC
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 0
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
Nightingale 1.0 Optics Plates for RMR and RMSC
Materials (per plate):
1 M3x4mm Screw
1 M3x8mm Screw
Printing Instructions:I recommend PETG with 4 walls and at least 20% gyroid infill, but PLA should be fine. Ideally, print this vertically.
Installation Instructions:
1. Print it and clean the edges
2. Remove any plates and rails currently on the top of your Nightingale 1.0
3. Use the long screw in the rear hole to secure the muzzle
4. Use the short screw in the front hole to secure the muzzle
5. Install the optic according to its instructions