574 models
DESCRIPTION 3D model of a VW Polo armrest latch. Can be printed without supports but it's cleaner with two small supports under the clips. PRINT Printed using Prusament PETG. You can print it in PLA but it's better using PETG. Infill 100%…
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Armrest latch for Mitsubishi Pajero sport (K90). Recommendation: Material: PETG Layer height 0.15 mm Infill: min. 50 % gyroid
My first detailed model created based on provided measurements, as a request. First version has been printed, but not yet tested. I printed the matching male part from plabs.cz (Thank you!) slightly modified to make rounded part 8mm wide.…
I made this model for a friend of mine who's removed the armrest in a Fiat 500, since it wasn't as comfortable as she's hoped. This model is quite large, the size is due to the hole on the driver's seat leather that has to be there so…
Simple stand creating some flat surface in arm's reach in your sofa spot The design is parametric in some extent, but it may occasionally break in timeline with a lot bigger/smaller values Functional print designed to use little to…
Give your hand a helping hand with this ergonomic armrest! You can use it for any activity that requires your hand to stay in the same place/position for extended periods of time and you can use the tool holder to design and use any tools…
This is a flexible armrest tray that I created for my couch so I can leave my cup of tea, or my snacks in a flat place without the worry of it falling or tipping because of the couching of the sofa. Print the test piece first to see if…
Customizable Couch Armrest Table with optional Tablet Holder First and foremost, this is an armrest table for various sizes and shapes of couch armrests. On top of that, I found it appealing to attach things to my sofa. So, with the…
The original clip of the armrest of Audi A3 8p (2002-2010) is very fragile. I had a similar issue with my previous Audi. :-( This model can be used in replacement of the original clip. Let me know if it works for other Audi models.…
For this project I used PETG and TPU. This model is designed for you to split this object according to your bed size. UPDATE: Removed bottom lip x1 and made the feet less of a black hole for glueing by updating Tray x1, Front feet x1 and…
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
The armrest latch of the Kia Ceed is prone to breaking. This is a known problem. I designed and printed this replacement part for a friend. I put i here so it might be usefull for other people as well. Designed with Freecad. Printed with…
Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks. Made two of these for my IKEA LANDSKRONA couch, however it should fit…
+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…
Ever bored of finding all the pieces and files of armrest, to only be unsuccessful at printing or using them together? this perfectly solve the issue with the V2 restored, the file include the following feature: box storage for all your…
This model sits on the tray inside the center armrest of a Subaru Outback (2022). Has dividers intended for a wallet, glasses, and coins (depending on model). Multiple variations are provided as STL. Original Fusion files also provided.…
For GMT800 (1999-2007 GM/Chevy Trucks and SUV) arm rest switch panel replacement clip. This will need to be glued or epoxied in place. Trim old clip location on the arm rest and place this part into the hole underneath. The model is for…
This is my easy-to-print organizer for all of my stuff. It fit the cabinet below my armrest perfectly. It can store a pen, some cash/coins and lots of other things you want to have with you and organized in your car. I printed it with a…
Spacers to increase the Omni's armrest sliding resistance - one for the right, and one for the left. They're different since the left needs to accommodate the cable for the electronics. Recommended printing settings: I used PLA+ but…
The cover image was created by ChatGPT. I'm not sure if that qualifies as an "AI-assisted creation."
Walther P22 or similar air pistol RMR or RIS mount. This part is based on the general concept for the Walther Brand bridge mount giving the user the ability to mount parts above the slide by mounting a bridge to a support under the rails…
This was designed to repair the broken hinges on the center console arm rest cover of a Volkswagen Golf, but if my research is correct, I think it will work on several Volkswagen models including many Volkswagen Golf, Jetta, Beetle, Bora,…
I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…
Caja portaobjetos para el reposabrazos central de Fiat Tipo 2018-
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
Remixed XDr4g0nX thing to fit an RMR cutout
Remix of the @JobPrinter model, almost identical, it fits great in the car.
Easy assembly. No purchase parts needed. Most parts are designed for a pressfit. If it should be too loose you can add some glue. The cork, plywood, felt or TPU applications need to be glued into place.Please be realistic. This product…
Mitsubishi Lancer X Armrest Organizer Update : a new model V15 is uploaded which is 2mm smaller for a better fitment . Fits on Lancer X Evo 09-15+ Lancer Ralliart 09-15+ Lancer Sportback 09-15+ Possible Lancer Ex Features 2 large Storages…
I have done my best to replicate the inlay of the armrest of my Skoda Karoq as faithfully as possible. In addition, the diameter of the front cup holder has been increased to 75mm so that thermos cups can also be placed. Two models are…
First and foremost, these designs are not my own. I am uploading them with permission from the creator, Scott from The Edge of 3D , and under the same license. He designed and tested this car in just a few months for the very first Rock…
Update: Fusion360 File added in case u have to customize it :D BUT Dont Blame me for my poor CAD Skills and the Messy File. ENG: This model is inspired by " TheBuildbay ", which I recreated in CAD and adapted so that armrest pads fit on…
I wanted a sighted RMR plate for my first P80 build so I remixed the first blank RMR that fit my Glock 19 V4 is the final and recommended version
VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…
Little print to raise the arm rest of your Cupra Born
In my apartment, I've got an IKEA Kivik couch. I like to use my PC on my large TV from the couch. I've also got a lot of remotes laying around, and the occasion drink. I've got storage and use problems. I had a slim endtable on the side,…
I changed the original model so that all walls are of the same height.
The armrest in current Seat Arona and Seat Ibiza cars is very low and slanted downwards, making it uncomfortable for some people to rest their arm on. This riser is designed to fit perfectly on the front edge of the compartment under the…
An airsoft rmr adapter plate for we mos glock To secure the dot on the plate you'll need 2 M3 hex nuts UPDATE: The plate is now ready, the hex nut need to be grinded down about 50% to fit under the plate. Applying some heat to the nut may…
UPDATE [4/30/26]: In lieu of Libernovo changing the hollow square slot to be solid, I have designed a newer version that will work with all models and is stronger. After taking apart my armrest after months of using the first version, I…
I created this a few years ago after seeing a very nice bent plywood side table that came with a couch. I didn't want that couch, but I really liked the look of the side table, and it seemed like a great place to add a remote control…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
only manual transmission 2015 -
Kette Reif, Armreif, Handgelenk-Kettchen Innendurchmesser auf dem Druck-Bett 72 mm Außendurchmesser auf dem Druck-Bett 120 mm Höhe auf dem Druck-Bett 9 mm
2024-10-03 - updated the license to allow commercial use of this model. I would appreciate it if you could buy-me-a-coffee if you find this model useful or profitable :) I got myself into a very well-known situation. You own a 3D printer,…
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
The latch for the centre armrest console of my Audi A3 2006 broke off and I couldn't find a replacement without replacing the entire lid. The Part Number for the latch is 8P0864245A/4. Unfortuantely, I'm not sure what other Audi's this…
A friend of mine owns a Toyota Corolla hybrid and was always complaining about the armrest box. (too deep and messy) I designed these three box well shaped according to the non regular shape of the armest box. i suggest to print them in…
Warning Already printed but not yet assembled with all the Max Team van. Modeling seems to be ok but it should be tested in the real life. Definition None Printing Is required the same printer size than 3D SETS has defined. Use the same…
I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.
Hello! I had a problem with a broken latch on my car, so I made one myself in Fusion360. It's slightly modified so it's not as big as the original.
WARNING: THIS IS NOT A STANDARD RMR COVER PLATE! It has been specifically designed to fit an Agency Arms Glock RMR Iron Forward RDS Mount from their AOS line. Pictured is a Gen4 Glock 19. Some context: RMR covers on Thingiverse didn't fit…
Tesla Model Y 2025 Juniper ( Gigafactory Berlin ) armrest organizer, tray. PLA filament not recommended, I used PETG stronger with 45 degree printing use outer brim manual support for the back side and easy remove use tree support for the…
This coin holder supports 50ct, 1€ and 2€ coins. There are nine slots. Each slot fits for the three coin types. There are only nine slots so you can grab a coin easily. There is not much material below the coins. That is necessary because…
Trijicon RMR to Holosun 407k / 507k adapter plate for Brownells Glock 17/19 RMR cut slide or MOS Version 2 Will require the slide posts to be shaved down about 1.5mm or so, you will also need to grind away some material from the 3mm nut…
Had a beige filament and wanted to print something matching with it. Created procedurally in Geonodes with Blender 3.2. Woven Bangle Model. I designed it for small arm diameters. You might have to scale it up for your arm. The model is…
Couldn't find a decent organizer, so made my own It's pretty customizable to whatever spaces and sizes you want; openscad code and comments should be medium self-explanatory, but let me know if you have any questions. The current settings…
original files from: https://www.thingiverse.com/thing:3114789/files I successfully split the original USB connection from the car to 2 USB sockets with these components →…
I wanted to use the Burris FastFire4 with my FN-P90. But with that FastFire on the picatinny-rail, the sight-line is quite far above the bore-axis. So I wanted to use the HBindustries mount instead of the original picatinny. Which lowers…
Armrest Ramp for rear of Sidestick Cabinet. Designed for cabinet with 5 degree slope and 10mm radius on top panel. Dimensionally accurate with real aircraft. Print in matte or gloss black PLA, 50% infill for solidity and 0.15 layer height.
Replacement Mitsubishi Pajero Center Console Armrest latch
Fiat 500 armrest delete plug (2013+ i think). Search YouTube to see how to remove the armrest and then pop this in. Includes cool scorpion logo. No supports necessary. I lightly sanded and painted to hide print lines.
designed a perfect fitting inlay print the TPU inlet with hilbert curve with no top layer to make sure your stuff dousnt slip around
A simple spacer to add to the Omni's armrests to significantly increase tension.
Screw-in Covers for IKEA Markus chair as replacements for the original armrests. Tired of your Markus chair not fitting under your desk? I present to you this simple yet elegant solution. Printed in Prusament PLA Galaxy Black. Does not…
Apr 2026 - recently tried it on my wife's Mazda cx5 and that worked well too. Printed a vertically scaled model for a longer armrest, then crafted/sown together a larger pad, feels great! (Orange IRL pic is scaled up to about 245mm…
Spacers that fit the secretlab Titan 2022, and possibly other chairs. Allow the armrests to be lowered by an additional 25mm without getting in the way of the controls. Requires (per arm): 3x M8x50mm bolts 3x m8 washers (+optional split…
Bandeja apoyabrazos MG ZS Hybrid+. Atención solo sirve para el modelo Hybrid+ 2024 - 2025. MG ZS Hybrid+ armrest tray.
Ersatzhebel für Deckel der Mittelarmlehne eines Zafira B oder Astra H Material sollte PETG oder ABS verwendet weren PLA nur bedingt (funktioniert aber bei mir schon einige Zeit mit PLA) Support nicht notwendig (maximal unter dem…
I often use computer on big TV from my sofa. For that purpose I always keep my second keyboard and a trackball near my sofa. This simple small table for sofa armrest gives the keyboard and the trackball their own dedicated place. The…
Side table that fits onto the armrest of a couch or sofa with remote control slot and circular dip for a glass/cup.
Adapter plate to mount aliexpress style RMR on your WE Sig P226/F226. I recommend printing at 0.1mm layer height, 4-5 perimeters and high infill. For assembling the plate to your pistol, you use two M2x16 screws and two M2 nuts . To put…
This model locks the arm rests to one position of your choosing by replacing the indexing component inside the arm rest with a fixed piece. There are 11 plate options labeled -5 to +5. The more negative a number, the further outwards the…
This little table is designed to be used on the side of a chair or couch but can also be used as its own on a table or shelf for extra space. This little shelf provides stability for various objects that you might use such as remotes,…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
It was a bit of a pain to design a flat part that can fold around a curved armrest and fit the vertical spikes in the frame, but I think it worked out pretty well. It's really easy to print and it fits on a MK3S bed. You probably want…
The armrests of my Ikea Markus office got damaged and I needed some caps to hide bolt holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 160 Infill: 20 Filament: unknown PLA black Notes: Bottom Pattern Initial…
Make the part as strong as possible, use ABS (or PETG), print with 4 Perimeters, 4 top/bottom and >40% infill. If it fails, then under load and the load is, in the worst case, you, leaning on the armrest while sitting down on the chair.
If you love this chair, but don't like armrests this is the perfect hack for you. This cover hides the open screws for the armrests. No gluing or screwing necessary, the cover is simply pushed onto the two screw holes (A hammer can be…
Magazine for Diana pellet guns. Should fit the models: Trailscout, Stormrider, Bandit and Chaser. I tested it on a Diana Trailscout. The magazine fits seven 4.5mm rounds and uses a 6x18mm spring for tension. On the bottom is a slot to fit…
A basic organizer for the top of the Polestar 3 armrest compartment. The armrest compartment of the Polestar 3 is quite large but that is due to its depth. This means that it can easily hold longer items, but who does that in the armrest…
BMW i3 Armrest Storage Tray (Replaces Snap-in Adapter) Description Transform the wasted space in your BMW i3! This custom-designed storage tray replaces the bulky, outdated phone snap-in adapter found in the center armrest, converting it…
Trasforma il bracciolo del tuo divano in una stazione relax completa! Questo tavolino stampabile in 3D è progettato per chi vuole avere tutto a portata di mano: telecomandi, smartphone e una bevanda fresca, senza occupare spazio prezioso…
Good replica of the opel's armrest clip
This group of files includes the parts needed to make a Rivian Armrest Console Organizer Tray slide-out of the deep compartment. You can see the complete design in this post:…
After removing the original armrest there stays the ugly nuts. So I decided to design my own. A few minutes later was the first version done: printing testing, screwed it down fixing, resize the screws holes and make it suport les…
Diana Stormrider magazine replacement part. With this type of magazine it is very hard to see if you shot the last pellet. This way I ruined my magazine drum pretty quickly. With the bright orange drum it is much easier to see. It reloads…
The original file "Opel Vauxhall Zafira B Astra H Armlehne / Armrest by jogiarea" looks 100% like my broken off original 2010 Zafira armrest clip. That is very impressive, as it is a quite 3-dimensional design! Unfortunately, when I…
wanted my RMR to sit as far back as possible but couldnt find a model that mounted it that way. made 2 different variations, mainly due to my middle screw on the top of my mk4 becoming stripped. May need to scale up or down a few percent…
An adapter which, after insert into the cup holder will create a nice armrest. Needs to be screwed or glued, tested and fit well, see photo. Print on Prusa XL The soft part was cut from a mason's sponge using a laser.
Plug for the driver's seat of a 2nd generation Honda Fit (GE) that covers a hole in the seat after removing the armrest. I removed the armrest on mine because the fabric was torn, and it was uncomfortable anyway. This plug screws in to…
No supports or brim required. A foldable couch armrest tray designed to create a flatter and more stable surface on top of a sofa or chair armrest. The tray is made from multiple connected long segments, allowing it to flex around the…
Print so that the top surface is flat and use supports. Printed in abs to withstand summer heat. Category: Automotive
One of the most satisfying fix yet. I needed a replacement for broken armrests for two office chairs that looked awful. End result looks like factory one. Printed with TPU has nice flex and fits perfectly. No supports needed for this…
![Universal Vehicle Window Armrest [STURDY!] for Car Truck Van Sedan](https://media.printables.com/media/prints/b2f98d5e-8461-4564-9686-ca987c0a7d27/images/12573660_187261b7-cf9c-4bfa-97a2-c4caca94a7f1_74ab2709-3349-4fe8-91c7-fb1dc5b66efe/20260407_111147.jpg)
