Adapter Doctor onto RMR
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter plate to mount optics with a doctor-footprint onto a mount that has RMR-footprint.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 244
- Makes
- 0
- Views
- 970
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I wanted to use the Burris FastFire4 with my FN-P90.
But with that FastFire on the picatinny-rail, the sight-line is quite far above the bore-axis.
So I wanted to use the HBindustries mount instead of the original picatinny.
Which lowers the sight line about 15mm.
Of course you'd loose the back-up sights, but a battery-change with the FastFire is simple and fast.
However the mount from HBindustries is available for a lot of different footprints, but not for doctor…
So I made an adapter that would allow to mount the FastFire with doctor-footprint onto the RMR-version of the optic-mount.
Printed with PC-CF and as thin as possible, I doubt there will be a problem with durability.
Threads for the doctor-mount are 5-40, in case someone wonders…
Do NOT use Loctite in Plastics!
Through its chemistry, Loctite dissolves plastics, doing the opposite you'd intend.
Instead use a small dab of CA-glue.
The adapter is designed to be screwed onto the mount with two socket-head-screws 5-40 x ½".