Collingwood H2 Pro 550 Ceiling Light Bezels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bezel allows the fitting of a H2 Pro 550 LED light into an oversized hole of 90-100mm
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
I was looking to replace some LIFX LED ceiling lights. They had required quite a large hole in the ceiling of 90mm diameter. My replacement lights (Collingwood H2 Pro 550) were simply too small for this sized hole - hence this solution.
The bezel was designed to fit a 90mm ceiling hole and I made two versions, one with a 10mm lip and one with a 20mm lip. The Bezel being the size of the hole means it holds the lamp centrally.
The bezel has notches for the retaining springs to fit through while sliding it over the lamp body. They serve a dual purpose, as once fitted to the lamp the bezel can be rotated 90º and the notches will then allow the lamps own beauty cover to be fitted (the brushed steel rings in the photos).
I printed mine in White PETG