1 / 2
Olympus Zuiko ED 60mm F2.8 Macro Hood and Diffuser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus…
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 76
- Makes
- 0
- Views
- 1,014
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus Zuiko ED 60mm F2.8 Macro lens. I designed a separate ring for the bayonet and then a holder and hood that should be glued to the ring. Two variants of the ring were designed.
If you print it, please post a make!
Additional material needed:
- Lamp shield, e.g. https://www.clasohlson.com/se/Lampglob/32-4391
- M3 screws and nuts to attach the diffuser.
- Glue, I recommend: http://www.loctite-consumer.co.uk/en/products/super-glue-liquid/super\_glue\_liquidprecision.html
- Matt black paint if you want to paint the inside of the hood, e.g. https://culturehustle.com/products/black-3-0-the-worlds-blackest-black-acrylic-paint-150ml
Links:
http://makrofokus.se/blogg/2011/6/7/att-tamja-blixten.html
Print instructions
Category: Camera Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 20%
Filament: Prusa PETG black