1 / 2
Olympus Zuiko ED 60mm F2.8 Macro Hood and Diffuser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1014
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus Zuiko ED 60mm F2.8 Macro lens. I designed a separate ring for the bayonet and then a holder and hood that should be glued to the ring. Two variants of the ring were designed.
If you print it, please post a make!
Additional material needed:
- Lamp shield, e.g. https://www.clasohlson.com/se/Lampglob/32-4391
- M3 screws and nuts to attach the diffuser.
- Glue, I recommend: http://www.loctite-consumer.co.uk/en/products/super-glue-liquid/super\_glue\_liquidprecision.html
- Matt black paint if you want to paint the inside of the hood, e.g. https://culturehustle.com/products/black-3-0-the-worlds-blackest-black-acrylic-paint-150ml
Links:
http://makrofokus.se/blogg/2011/6/7/att-tamja-blixten.html
Print instructions
Category: Camera Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 20%
Filament: Prusa PETG black