Clawd - Claude Code Pixel Mascot, 252 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat Clawd pixel mascot with recessed eyes. Print in one color, use a layer color change, or load the included eye parts for multicolor printing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Clawd from the Claude Code terminal, turned into a large, flat pixel mascot. The shape follows the default sprite in Claude Code 2.1.161. Pixels are twice as tall as they are wide to reflect terminal character proportions.
Dimensions
- Body: 252 x 157.5 x 4 mm.
- Eye pockets: 3.2 mm deep, with a 0.8 mm floor.
- Two separate eye volumes are supplied in the eyes STL, aligned with the body.
Printing
Print flat, eyes upward, with no supports. Designed around a 0.4 mm nozzle. On a P1P plate, only 2 mm remain at either side: do not add a brim, and check the plate edges, front-left exclusion zone and any prime tower.
- One color: print only the body; the eyes remain deep recesses.
- Layer color change: print only the body, starting in black. Switch to orange on the first layer above 0.8 mm. The eye floors and a narrow strip along the lower edge remain black.
- Flush multicolor eyes: import body and eyes together as one object with two parts, preserving their common coordinates. Assign the eyes to black filament. The eye geometry starts at Z=0.8 mm and rests on the body, so do not arrange or print it independently on the bed.
There is no assembly clearance between the supplied eyes and pockets: the eye parts are intended for multicolor printing, not separately printed press-fit inserts.
Editable source
Change target_width, thickness or pixel_aspect in the SCAD file. Use pixel_aspect=1 for square pixels.
openscad -D 'part="body"' -o clawd_pixel_mascot_252mm_body.stl clawd_pixel_mascot_252mm.scad
openscad -D 'part="eyes"' -o clawd_pixel_mascot_252mm_eyes.stl clawd_pixel_mascot_252mm.scad
part="preview" is a display view, not a production STL.
Verification
A P1P slice was checked on 2026-10-01 with a 0.4 mm nozzle, 0.20mm Standard and PLA Basic: approximately 82 min and 71 g for the body. Body and eyes were also sliced as one object; AMS filament assignment has not been verified. No physical test print is claimed.
Clawd and Claude Code are associated with Anthropic. This is an unofficial decorative 3D adaptation.