Small Table 210x210mm – Modular Threaded Legs

Modular small table designed to be printed entirely on a Creality Ender 3 V3 SE. It consists of one top and 8 legs. The legs are stacked in pairs, two per corner, and joined by threaded pegs, so no glue is needed.

The top is printed face-down, so the visible surface of the table is the one that touched the print bed.

Dimensions

• Top: 210 × 210 mm, 17 mm thick (2 mm solid floor, 1 mm perimeter rim, 15 mm high)

• Legs: Ø 10 mm × 105 mm each (threaded peg included), 8 pieces

• Assembled height: 217 mm

• Leg spacing: 200 × 200 mm (corner to corner centers)

Parts to print

• 8 × leg

• 1 × top

Assembly
Screw the threaded peg of each leg into the socket of the next one. Then screw the two stacked legs at each corner into the top. No glue needed.

Included files

• STL: leg and top

• .3mf with both plates set up for Creality Print (plate 1: 8 legs, plate 2: top)

Printer and material

• Printer: Creality Ender-3 V3 SE, 0.4 mm nozzle

• Slicer: Creality Print 7.3, 0.20mm Standard profile

• Material: PLA (Hyper PLA profile)

• Temperatures: 190 °C nozzle / 50 °C bed

Quality and strength

• Layer height: 0.2 mm

• Walls: 3

• Infill: 25% gyroid

• Top / bottom layers: 3 / 3

Plate 1 – 8 legs

• Printed upright, peg end up

• Filament: 44.8 g (about 5.6 g per leg)

• Brim: yes (auto)

• Supports: none

Plate 2 – top

• Printed face-down, solid floor on the bed

• Filament: 93.0 g

• Brim: none

• Supports: none

Total: about 138 g of PLA.

Note
Original design, shared for personal, non-commercial use.