Nema Stepper Motor Brackets for Vertical Plotter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three different brackets made for Nema pancake stepper motors (17HE08-1004S) for use in a vertical plotter.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Three different motor bracket options to use with a vertical plotter when you need to mount the motors with shaft towards the wall. M3 screws (2 min, 4 max) needs to mount motor to bracket.
Minimal Bracket (1 screw hole and 2 screw hole models)
Only one side mounts to wall. Model with two screw holes or one. Can be printed on the side without support but needs brim/raft. Screw holes in minimal brackets: 5.2mm
Two Sided Bracket
Must be printed with support. Screw holes in two sided bracket: 5mm
Suction Cup Bracket
If you want to mount the plotter on glass, a window, or another surface that will hold suction cups, suction cups up to 60mm in diameter with M4 or M5 threaded studs will work.Can be used for example with these (M4x50mm diameter): https://www.amazon.de/DIYexpert®-Suction-M4x10mm-Transparent-Knurled/dp/B084C1L13D/ or similar. Must be printed with support. Screw holes diameter: 5.3mm