Nema Stepper Motor Brackets for Vertical Plotter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three different brackets made for Nema pancake stepper motors (17HE08-1004S) for use in a vertical plotter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Three different motor bracket options to use with a vertical plotter when you need to mount the motors with shaft towards the wall. M3 screws (2 min, 4 max) needs to mount motor to bracket.
Minimal Bracket (1 screw hole and 2 screw hole models)
Only one side mounts to wall. Model with two screw holes or one. Can be printed on the side without support but needs brim/raft. Screw holes in minimal brackets: 5.2mm
Two Sided Bracket
Must be printed with support. Screw holes in two sided bracket: 5mm
Suction Cup Bracket
If you want to mount the plotter on glass, a window, or another surface that will hold suction cups, suction cups up to 60mm in diameter with M4 or M5 threaded studs will work.Can be used for example with these (M4x50mm diameter): https://www.amazon.de/DIYexpert®-Suction-M4x10mm-Transparent-Knurled/dp/B084C1L13D/ or similar. Must be printed with support. Screw holes diameter: 5.3mm