Gumball ship machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d printed working gumball machine with a space ship theme. Capable of holding ~35mmx~35mm~35mm in size.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain

Ever hated grabbing candy out of the huge containers? Ever wanted more fun? You can print out this huge gumball machine that is cable of candy ~35mmx~35mmx~35mm
This project requires no screws or heat inserts, but needs a lot of glue that will hold two flat surfaces together really well!
In the design currently, the tank is made out of transparent filament, where it is your choice to edit how the ship looks. You don't need a transparent tank unless you want to see the candy.

[
[
[
[
order of parts:
CAP - This is a threaded part where you could just screw into the tank. You can roll this in right after printing and used for closing the top / pouring candy in
TANK - This is a transparent holder used to hold a enormous amounts of candy and you can use this right after printing
FUNNEL / CONTAINER - This part is used to stop candy from going straight through both the rotator and filter, making you have to rotate to get only one / a few pieces at a time.
ROTATOR - This is the mechanical part where you turn the wheel and this spins so that candy drops into those holes and drops down through the filter into the bottom part of the body.
WHEEL - A spindle to move the rotator around and push candy through the filter
FILTER - Used to stop candy going straight from the funnel / container and the rotator.
BODY 1 / BODY 2 - The main parts of the body. These are split it two in order to achieve print size and make it easier for printing.
[
[

ASSEMBLY
When assembling, you may need to use an exacto knife to cut some millimetres off in order to fit some pieces in.
The order of fitting the pieces are
#1 fit the filter into one of the bodys
#2 fit the rotater into the top of the filter
#3 slide the wheel through, hitting the rotator
#4 put together the second body and attach the container.

[
GLUE #1 - CONTAINER / FUNNEL + 2 BODYS
When sliding the 2nd body in, glue together the two and make sure they're perfectly even. Next, glue together the top of the body and the top of the container and make sure that the container doesn't touch the rotator or else you'll have a difficult time turning

GLUE #2 - FILTER + BODY
Make sure to attach the filter and body together and glue in order so that when turning the rotator, it doesn't take a difficult time and you won't turn the filter around.

[
Tip - WHEEL
Assure that the wheel does properly turn the rotator and both aren't hard to turn.
