Flexible support for AmazonBasics Touchpad (incl. template)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp, position and orient your touchpad anyway you want! Includes a template of the pad itself. Uses M5 and M8 hardware
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
2 axis support for this product :
https://www.amazon.fr/Amazon-Basics-Commandes-Tactiles-Multipoints/dp/B0F7QFV5CM
Friction fit of the cross clip to the pad.
Includes 2 options for the clamp : inline or 90 degrees.
Includes 2 options for rod length.
Includes optional bumper for the M8 screw for stronger clamping.
Includes a template of the touchpad itself if you want to design your own stand.
Hardware required :
- 4 M5 bolts for assembly (ideally 2x 16mm and 2x 20mm, use locking nuts for the rod)
- 1 M8 bolt (ideally 30mm)
Make sure to print the clamp horizontally, so the perimeters loop around the top and bottom plate for maximum strength.
Compatible with my MX Keyboard support :