1 / 14
Ducato Camping car front screen plissee (pleated) blinds version 2 (No mirror delete) — image 1
1 / 14

Ducato Camping car front screen plissee (pleated) blinds version 2 (No mirror delete)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

In September 2025 I created Ducato cabin blinds. This version (V 2.0) does not require a rear mirror delete

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
42
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

In September 2025 I created an easy-to-print, cost effective and easy-to-handle cabin blinds for our Ducato camping car (RV).
https://www.printables.com/model/1430123-ducato-camping-car-front-screen-plissee-pleated-bl

In October 2026 I made version 2.0 available.
This version does not require a rear mirror delete.
No punch holes in your car.

In this version, the clamp parts A+B+C assembled can be glued to the front screen above the rear mirror. And the door clamps (4.5mm and the 10mm) clicked behind the plastic trim.

For the build you will need:

2 Cheep blinds from Ali or alike shop (width 150x90cm, can be cut for exact window width using a utility knife and the height using a metal saw)
6 round magnets with a hole. I attached the magnets with a hole to the original press stud connectors.
6 round magnets (glue them to the blinds in the correct orientation)
1 hole punching tool
2 aluminum 8mm tubes or 4.5mm steel (curtain) rods (cabin width)
1 special car mirror glue (Loctite for example)

Use:
PETG, PLA will melt in the hot summer sun.

You can use a (aluminum) rod 10mm outer diameter or a solid steel rod 4.5mm (used for curtains opening/closing) (for the Dutch people: try Gamma)

Assembly instructions:
1 Print the parts:
2x Clamp_Door (4.5 or 10mm) one pair, fitting your tube dimensions
1x ClampA_Mirror (fits both tube dimensions)
2x ClampB_Mirror (fits both tube dimensions)
2x ClampC_Mirror (fits both tube dimensions)
2x Keep-Open-Clamp
1x measuring-Tool (option makes holes punching easier)
1 Use the measuring tool and punch holes in the curtains on the top. (Keep the silver side out and the black inwards)

2 Squeeze the Door_Clamps behind the plastic near the front window.

3 Assembly the mirror parts:
a) put Mirror_ClampC in the Mirror_PartB
b) Shift the parts to Mirror_PartA (it should press fit, I did not need to glue to fix Mirror_ClampB to MirrorClamp-A)
c) glue the assembled mirror parts on the screen. And let it dry.

4 Cut the tubes/rods to the correct length.

5 Attach the curtain onto the tube. Mount the tube beginning on the door site, and lock it with Mirror_ClampC.

6 Glue magnets to the curtains (correct orientation) so it will keep the curtains close to the window post magnets.

7 Use the Keep-Open-Clamps when driving.

Have a look at these projects:
Version 1.0
https://www.printables.com/model/1430123-ducato-camping-car-front-screen-plissee-pleated-bl
https://www.printables.com/model/1711617-ducato-camping-car-side-screens-plissee-pleated-bl

https://www.thingiverse.com/thing:3671933
https://www.printables.com/model/307428-campervan-curtain-holder
https://www.printables.com/model/600885-plisseeriegel-verschluss-frontscheibe

enjoy!
s10k

Tags