Test Cube Calibrate 20x20x20mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this calibration cube is designed to check the dimensional accuracy and print quality along the X, Y, and Z axes
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
XYZ calibration cube 20×20×20 mm for everyone :)
WHITE CUBE IS BEFORE CHANGE SETTING AND BLUE CUBE IS AFTER CHANGE THE SETTINGS (it can be better but my hotend crashed and also I can do same more settings but Im to lazy so it is what it is)
printed on my cr-6 se :D
What does it test?
dimensional accuracy (X, Y, Z)
surface and layer quality
sharpness of corners and edges
vibrations (ringing/ghosting)
possible print deformations
Recommended print settings:
Layer Height: 0.2 mm
Infill: 5–15%
Supports: Disabled
Brim/Raft: Disabled
Wall count: 2-4
How to check ur results:
print the cube and let it cool down.
measure the X, Y, and Z dimensions using digital calipers (each axis should ideally measure 20.00 mm)
check the letters for sharp edges and visible defects.
inspect the surface, corners, and layers.
Tips:
Small dimensional differences are normal. If dimensions are inaccurate, check your flow rate, printer mechanics, and slicer settings. My cubes are made of CR-PLA. I hope this test help u to calibrate and print better models :)
Let me know how it went.
Happy printing guys! :)