Test Cube Calibrate 20x20x20mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this calibration cube is designed to check the dimensional accuracy and print quality along the X, Y, and Z axes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
XYZ calibration cube 20×20×20 mm for everyone :)
WHITE CUBE IS BEFORE CHANGE SETTING AND BLUE CUBE IS AFTER CHANGE THE SETTINGS (it can be better but my hotend crashed and also I can do same more settings but Im to lazy so it is what it is)
printed on my cr-6 se :D
What does it test?
dimensional accuracy (X, Y, Z)
surface and layer quality
sharpness of corners and edges
vibrations (ringing/ghosting)
possible print deformations
Recommended print settings:
Layer Height: 0.2 mm
Infill: 5–15%
Supports: Disabled
Brim/Raft: Disabled
Wall count: 2-4
How to check ur results:
print the cube and let it cool down.
measure the X, Y, and Z dimensions using digital calipers (each axis should ideally measure 20.00 mm)
check the letters for sharp edges and visible defects.
inspect the surface, corners, and layers.
Tips:
Small dimensional differences are normal. If dimensions are inaccurate, check your flow rate, printer mechanics, and slicer settings. My cubes are made of CR-PLA. I hope this test help u to calibrate and print better models :)
Let me know how it went.
Happy printing guys! :)