Halloween Matryoshka Nesting Dolls, 6-Piece Multicolor Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Six Halloween nesting dolls in folk matryoshka style, with snap-fit halves and flush 4-color inlays for AMS printers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
## Overview
A six-piece Halloween nesting doll set in traditional folk matryoshka style: Black Cat, Scarecrow, Jack-o'-Lantern, Skeleton, Ghost, and a solid Mini Jack at the center. Each doll opens at its widest point and snaps closed, and every doll nests inside the next. The artwork is printed in, not painted: each color is a separate flush inlay part, using orange, black, yellow and white.
## Print Settings
- Printer: Bambu Lab X2D, 0.4 mm nozzle, AMS
- Material: PLA. Indoor display piece, so PLA is fine.
- Layer height: 0.20 mm
- Walls / infill: Bambu Studio defaults (2 wall loops, 15% sparse infill)
- Supports: none
- Orientation: bottom shells base-down, top shells rim-down (head up), Mini Jack base-down. The 3MFs are already oriented.
- Brim: a 5 mm outer brim is recommended for the top shells, which stand on a narrow rim.
- Filament slots are pre-assigned in the 3MF: 1 orange, 2 black, 3 yellow, 4 white. Load your AMS in that order, or reassign the parts in Bambu Studio.
Files:
- Full set on one plate (fits a 256 x 256 bed, 230 x 230 mm footprint)
Color changes: every layer that shows more than one color needs a filament swap, so this is a long print with a lot of purge. Printing the whole set on one plate shares each layer's changes across all pieces and cuts the total to about a third of printing doll by doll. A dual-nozzle printer cuts it further. The set also prints well in a single color: assign every part to one filament.